Shredder – rotary shearVon der Mehden GmbH
Rewowi 990NZ Quad
Shredder – rotary shear
Von der Mehden GmbH
Rewowi 990NZ Quad
FCA VB به اضافه مالیات بر ارزش افزوده
€۵۹٬۰۰۰
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Innsbruck-Land 

اطلاعات پایه
- نام دستگاه:
- Shredder – rotary shear
- تولید کننده:
- Von der Mehden GmbH
- مدل:
- Rewowi 990NZ Quad
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۲٬۰۰۰ h
قیمت و مکان
FCA VB به اضافه مالیات بر ارزش افزوده
€۵۹٬۰۰۰
- موقعیت:
- Innsbruck-Land, اتریش

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۴٬۵۰۰ کیلوگرم
جزئیات قدرت
ولتاژ ورودی:
۴۰۰ V
نوع جریان ورودی:
سه فاز
جزئیات بیشتر
طول روتور:
۱٬۰۰۰ میلیمتر
عرض روتور:
۹۹۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A23349086
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۸.۰۸.۱۴۰۵
توضیحات
The Quad 990 from Von der Mehden GmbH is a slow-speed, four-shaft shredder specifically designed for continuous industrial operation in data privacy-compliant document destruction.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
Keds Akv I Tepfx Akiend
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
Keds Akv I Tepfx Akiend
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین بار آنلاین: هفته گذشته
ثبت شده از: 2026
۱ آگهی آنلاین
ارسال درخواست
تلفن & فکس
+49+43660... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است












