جرثقیل نصب‌شده روی کامیون

VOLVO FH500 6x2 mit Fassi F545 2.27 JIB Winde sofort

Chassis – New Vehicle: – NEW MODEL 2025

• Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm
• Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe
• Reversing camera fully installed

Bodywork:
• Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame.
• All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards.
• Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color.
• Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front
• Drop-side platform body made of steel/welded structure, removable
• Approx. length 380 cm, width approx. 248 cm
• Platform body painted in RAL shade (chassis color)
• Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable
• Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color)
• 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement
• 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body)
• Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on
• Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified.
• 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available
• 1x BROSSBOX toolbox, between crane and front wall
• Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall
• Brackets (for outrigger pads, crane plates) made from galvanized steel
• Additional stabilizer mounted underneath the chassis
• Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections
• Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer

New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions

Additional Equipment and Crane Accessories:
• 5 x crane outrigger pads with brackets, layout as per production drawing
• AWC (automatic rope length control)
• Operating instructions, maintenance manual and crane inspection book

Lighting:
• 2 x integrated LED-AS in the front wall
• 2 x rotating beacons on FH roof
• 2 x strobe lights in the engine hood
Kdodpfsxvv E Ejx Aabew
• 2 x LED underbody lights at the rear, left and right, arrangement to be agreed
• 4 x LED-AS, 2 left and 2 right under the superstructure in the B

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.