کامیون حمل خودرو

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

4-Axle Volvo Machine/Platform Transporter
FH 500 8x2R

- Tag axle, electro-hydraulically steered, single tires
- Rear axle suspension with air suspension: 1 drive axle, 1 tag axle
- Safety long-distance driver cab FH
- Cab autonomous heater, 2 kW
- 33 l refrigerator with freezer compartment, under bunk
- Air suspension on front axle(s)
- Transmission / I-Shift control via driver's seat control unit
- I-Shift driving modes: Standard, Performance, and Economy
- I-See with map-based topography and traffic information
Nedpfx Adsw Itl Ue Tocn
- Eco cruise control (cruise control), including braking cruise control
- Manual shifting possible in automatic mode (incl. Kickdown, adaptive traction control)
- Adaptive cruise control (ACC) with collision warning and emergency braking
- Lane keeping assist
- Side collision avoidance and turn assist (on both sides)
- Driver alert system for fatigue warning
- VEB Volvo Engine Brake
- Etc.

WIESE body for platform and construction machine transport with hydraulic loading ramps

- With 2 pairs of wheel recesses incl. covers

Body dimensions:
- Length approx. 9,050 mm usable length
- External width 2,550 mm
- Loading height to upper edge of floor approx. 1,050 mm unladen
- Sturdy, weight-optimized welded steel construction, volume design
- Short cross member spacings for high point loads
- Rear tapered for low approach angle
- Outer frame profile 90°
- Front wall, reinforced version
- Storage box inside, below the front wall
- Grating floor
- Designed for 5,000 daN wheel load
- Above the axles: steel sheet boxes and outer frame with anti-slip coating

Load securing:
- 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame
- Longitudinal beams with continuous Multi-X contour along the full length with numerous 2.5 t lashing points
- 4 lashing eyes, 8 t, recessed at the rear (left/right/center/center)
- 4 lashing eyes, 8 t, recessed in front of the front wall (left/right/center/center)
- Outer frame profile 90°

Loading ramps:
Type: WFB 20 S-2
Load capacity: 18,000 kg per pair
Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm)
Platform width approx.: 850 mm per ramp
- Ramps as two individual/extendable pieces, both laterally adjustable
- Ramps can be used as approach ramps or as drive-through ramps for material handling equipment (extension section remains closed), fixed section placed onto the building ramp
- Sturdy locking bar for transport security (alternative with belt tension)
- 2 hydraulic rear supports with pads, buzzer and control light in cab
- Ramp and support operation via electro-hydraulics
- Control via radio remote control and emergency operation at the control block
- Control block mounted in stainless steel tool box at side of frame
- Superwinch 8.2 t cable winch with approx. 20 m steel cable
- Access steps with handrails right and left for access to load area
- 5 stainless steel toolboxes in drawer design, incl. lighting as option (surcharge)
- Side panels as per sample pictures (green vehicle) optional (surcharge)
- Body coating KTL
- Ball hitch at rear, 3.3 t
- 4 LED work lights
- 2 LED rear lights mounted high at the front wall
- 4 LED work lights on frame sides as ambient lighting
- 2 LED work lights at the rear
- 1 removable rotating beacon at rear

The stock vehicle comes with white cab and superstructure in Novagrau (outer frame paintwork according to RAL color of your choice upon request, price on application).

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.