Cylindrical grinding machineTSCHUDIN
HTG 610 U
Cylindrical grinding machine
TSCHUDIN
HTG 610 U
سال ساخت
۱۹۹۲
وضعیت
کارکرده
موقعیت
Großbettlingen 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Cylindrical grinding machine
- تولید کننده:
- TSCHUDIN
- مدل:
- HTG 610 U
- سال ساخت:
- ۱۹۹۲
- وضعیت:
- تعمیر شده در کارگاه (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Nürtinger Straße 75, 72663 Großbettlingen, Deutschland

تماس بگیرید
جزئیات فنی
- ارتفاع مرکز:
- ۱۵۰ میلیمتر
- طول سنگزنی:
- ۶۲۰ میلیمتر
- عرض در مرکز:
- ۶۸۰ میلیمتر
- قطر سنگ سنباده:
- ۳۵۰ میلیمتر
- عرض کل:
- ۵۰۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A15395977
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۱.۰۶.۱۴۰۴
توضیحات
Condition of the machine:
The machine is currently in a used, non-overhauled condition. The following work
carried out on the machine:
- Complete disassembly of the entire machine except for the guides
- Replacement of all sealing and wear parts of the entire machine
- Replacement of the infeed spindle of the X-axis
- Replacement of the main bearing of the workpiece spindle
- Replacement of grinding spindle
- All machine assemblies are restored to as-new condition
Geometry:
- Scraping of the X-axis guide
- Scraping the Z-axis guide
- Grinding the X-axis table
- Grinding the Z-axis table
Gsdpfx Aaorz Nflebebi
- Grinding the upper tables
- Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock)
- Creation of measurement report for TSCHUDIN cylindrical grinding machine
Painting:
The main assemblies are repainted, the rest of the machine retains the original paintwork
Electronics:
The complete electronics of the machine are checked, tested and defective switches and cables are replaced
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine is currently in a used, non-overhauled condition. The following work
carried out on the machine:
- Complete disassembly of the entire machine except for the guides
- Replacement of all sealing and wear parts of the entire machine
- Replacement of the infeed spindle of the X-axis
- Replacement of the main bearing of the workpiece spindle
- Replacement of grinding spindle
- All machine assemblies are restored to as-new condition
Geometry:
- Scraping of the X-axis guide
- Scraping the Z-axis guide
- Grinding the X-axis table
- Grinding the Z-axis table
Gsdpfx Aaorz Nflebebi
- Grinding the upper tables
- Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock)
- Creation of measurement report for TSCHUDIN cylindrical grinding machine
Painting:
The main assemblies are repainted, the rest of the machine retains the original paintwork
Electronics:
The complete electronics of the machine are checked, tested and defective switches and cables are replaced
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
ارسال درخواست
تلفن & فکس
+49 7022 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Großbettlingen
۴٬۰۹۱ km
ماشین سنگ زنی
TSCHUDINHTG 610U/660
TSCHUDINHTG 610U/660
آگهی کوچک
Metzingen
۴٬۰۹۲ km
JUNGJF 520 MS
آگهی کوچک
Metzingen
۴٬۰۹۲ km
GEHRING1 Z 250 - 131
آگهی کوچک
Reiden
۴٬۱۷۰ km
SchneebergerCorvus GDS 650
آگهی کوچک
Grüsch
۴٬۰۳۵ km
DECKEL- MAHODMU100P duoBLOCK
آگهی کوچک
Weißenhorn
۴٬۰۲۴ km
JUNKERSBUAJ 29 NC
آگهی کوچک
Kaufungen
۴٬۱۲۹ km
SchneebergerCorvus GDS 650
آگهی کوچک
Neunkirchen am Brand
۳٬۹۷۹ km
BRUDERERBSTA 60 H
آگهی کوچک
Székesfehérvár
۳٬۳۹۳ km
MuratecMuratec MW120 GT
آگهی کوچک
آلمان
۴٬۰۶۹ km
ISGEC300t - 2500t
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است














































































