Turning automatic lathe

Traub TNL 32 T 9

CNC Sliding Headstock Automatic Lathe

Manufacturer: Traub
Model: TNL 32 T-9
Control System: TX8i-s
Year of Manufacture: 2013
Location: Sweden, still in production
Availability: From January / February 2026
Operating Hours: approx. 40,000 h

Technical Data

Spindle through-hole (mm): 32
Max. spindle speed (rpm): 8,000
Power (100% / 25% duty cycle) (kW): 6.7 / 10.7
Torque (100% / 40% duty cycle) (Nm): 21 / 32
C-axis resolution (degrees): 0.001
Z axis travel (mm): 305 / 127 (sliding headstock / fixed headstock)
Rapid traverse Z (m/min): 20

Subspindle
Spindle through-hole (mm): 30
Max. spindle speed (rpm): 6,400
Power (100% / 25% duty cycle) (kW): 3.7 / 5.5
Torque (100% / 40% duty cycle) (Nm): 29.4 / 43.7
C-axis resolution (degrees): 0.001
X travel, rapid traverse (mm / m/min): 140 / 20
Z travel, rapid traverse (mm / m/min): 300 / 20

Tool Carrier 1
Configurable as turret
Number of stations: 10
Max. speed (rpm): 12,000
Max. power (kW): 3.4
X travel, rapid traverse (mm / m/min): 140 / 20
Y travel, rapid traverse (mm / m/min): -40/+25 / 20
Z travel, rapid traverse (mm / m/min): 300 / 20

Tool Carrier 2
Configurable as turret
Number of stations: 10
Gbodpfx Aox Rwkujgmsg
Max. speed (rpm): 12,000
Max. power (kW): 3.4
X travel, rapid traverse (mm / m/min): 140 / 20
Y travel, rapid traverse (mm / m/min): -25/+40 / 20
Z travel, rapid traverse (mm / m/min): 320 / 20

Dimensions, Weight, Electrical Connection
Weight: 7,350 kg (depending on configuration)
Connected load (kW): 28

Additional Equipment
- Chip conveyor
- External tank with paper band filtration system
- Bar feeder: FMB Turbo 3-36, 4.2 m bar length
- Guide bushes, collets, magazine liners (?)
- Tool holders, driven and static
- Documentation
- High-pressure coolant system
- Fire extinguishing system + Kraft & Bauer fire extinguishing system control

The operator panel and hard drive were replaced in spring 2025 (approx. €24,000 incl. service costs).

New drive belts for the main spindle and driven tools were recently changed.

Service carried out as scheduled.

Between 2019 and 2020, several extremely costly refurbishments of spindles and drive units were carried out, including new bearings and a new motor. At 27,000 operating hours.

All information has been provided to the best of our knowledge and belief, but we reserve the right to make errors.

Subject to prior sale.

All prices are net, plus statutory VAT, ex works.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.