Suction

TEKA StrongMaster IFA

1860 m³/h
Pressung 2.900 Pa
1,1 kW
filter surface area 10 m²
72 dB(A)
400/50 V/Hz
665 x 820 x 1365 mm
165 kg



mobile extraction, welding fume extraction
(manual cleaning by loss of pressure)

- Hose arm 3 m, joints inside
- Filter cartridge: dust class M
- Particle pre-separator: baffle plate
- Current type: 3Ph+N+PE

The filter system
-----
The mobile filter system of the type StrongMaster IFA is particularly suitable
for Welding work with unalloyed and alloyed steels, galvanized material and
Aluminum in case of heavy smoke development. She corresponds to the
Safety requirements for devices in the welding fume class
Chedpfx Acekm Rynefsd
"W3" (high-alloy steels with alloy components > 30%
nickel-based alloy). When used as intended, the system can be used for
be used in the recirculation mode, since the requirements for the
Exceptions according to TRGS 560 are fulfilled. The filter will
via a maintenance door using a compressed air gun from the clean air side
cleaned. The cleaned particles fall into a dust collection drawer from the
they can then be disposed of. The powerful scroll fan
ensures a high volume flow even with saturated filter cartridges.

The filter media
-----
A baffle serves as a pre-separator for coarse particles.
The filter cartridge installed below (dust class M, degree of separation > 99%)
filters the finest smoke and dust particles. The cartridge is factory
coated which increases the service life.

The extraction arm
-----
The extraction arm can be moved with the 3 internal joints
Position spring support slightly and is in the set position
cantilevered. A throttle flap integrated in the extraction hood enables the
Flow rate setting.