Horizontal machining center

SW Schwäbische Werkzeugmaschinen BA321

Technical specifications:

Machining workspace: X 300 mm; Y 500 (725) mm; Z 375 mm
Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A), index dividing head
- Direct measuring system, angular, rotation speed: max. 50 min⁻¹, accuracy: +/- 5''
Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum weight: 360 kg
Rapid traverse rates: X/Y/Z = 65/75/75 m/min; positioning accuracy Tp: 0.008 mm
Spindle spacing: 300 mm
Spindle speed range: 1–17,500 rpm
Spindle taper: DIN 69893-HSK-A63 (internal coolant supply)
Automatic tool changer: 2 x 32 positions; average chip-to-chip: 2.5 s
Maximum tool diameter: Ø 75 mm; maximum tool length: 275 mm; maximum tool weight: 7.5 kg

Electrical data:
Nsdpfx Aasxxrc Sj Dswp
- Supply voltage: 3x400 V / 50 Hz
- Installed power: approx. 85 kVA / 125 A

Machine dimensions:
- Installation area: approx. 3.6 x 6 x 3.7 m
- Weight: approx. 10,500 kg

Equipment includes:
- CNC control: Siemens 840D SL
- Linear axis measuring systems: Heidenhain linear scales
- Chip conveyor: Knoll Typ 550 K-1
- Oil cooling system
- Shaft, guideway, and switch cabinet cooling system
- 2 oil lubrication systems
- Oil mist extraction/recovery system: IFS Vario E2000 (2,000 m³/h)
- Fire protection: Kraft & Bauer
- Workpiece presence detection (P/Y): Low pressure air sensors
- In-process measurement: Marposs T25
- Tool breakage control and length measurement system: Inductive sensor (BRK)
- Tool support detection in working spindle

Machine status: NOT OPERATIONAL / NON-FUNCTIONAL

Installed components:
- Sensors for tool presence in spindle & part presence
- Hydraulic pump
- Hydraulic unit level & temperature sensors (Parker)
- Tool magazine piston & sliding door system (2 units)
- Communication module: Murr
- A-axis position encoder
- Hydraulic switches (Parker, 4 units)
- Emulsion filtration unit is shared with another machine (SW BA321 2460038)
- High-pressure pump from emulsion filtration system

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.