Horizontal machining center

SW BA321

Technical Specifications:
# Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm
# Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5”
# Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg
# Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm
# Distance Between Spindles: 300 mm
Lodpfxoxwvlne Am Aead
# Spindle Speed: 1-17,500 rpm
# Spindle Taper: DIN69893-HSK-A63 (with internal coolant)
# Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds
# Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg
Electrical Connection:
# Voltage: 3x400V/50Hz
# Installed Power: approx. 85 kVA / 125A
Dimensions:
# Installation Footprint: approx. 3.6 x 6 x 3.7 m
# Weight: approx. 10,500 kg
Equipment Includes:
# CNC Control: Siemens 840D SL
# Linear Axis Measuring System: Heidenhain linear scales
# Chip Extractor: Knoll Type 550 K-1
# Oil Cooling System
# Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously)
# Shaft, Guideways, and Switchboard Cooling System
# 2 Oil Lubrication Units
# Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h)
# Fire Suppression: Kraft & Bauer
# Part Presence P/Y: low pressure air detectors
# In-process Gauging: Marposs T25
# Tool Breakage Detection System: BRK and length check via inductive sensor
# Tool Support Detection System in Working Spindle
# Documentation: Only manuals available

Machine Condition:
Fully operational

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.