Sheet metal storage

Storemaster Master Tower SL 19

Storemaster Regal, Master Tower SL 19, with double-sided pull-out and 6m crane – used:

Price at location: €22,500 (net), disassembled and loaded

Manufacturer: Storemaster
Type: Master Tower SL 19
Year of manufacture: 2011
Kdjdpoz Dtu Rsfx Ad Ret
Max. possible load per drawer with uniform distribution: 1,200 daN
Max. possible load per shelf block with uniform distribution: 60,000 daN
Max. possible payload under the vacuum device attached to the 6m crane jib: 400 daN
PROJECT NO.: 1101 AS 11459

TwenTower SL with 19 large-format drawers, each with a load capacity of 1.2 tons, filling height: 50 mm,
Double-sided pull-out – continuous locking not possible,
Pull-out roller guides in MasterTower® SL –
- Standard design with pivoting function
OverheadTop with 5 large-format stacking bays, each with a capacity of 3 tons,
Overall height: 4,135 mm (bridge crane height 3,500 mm!!!)
Tower crane system-integrated for max. 400 kg sheet weight with a 6 m operating radius (from 350 kg sheet weight and fully electrified for safety reasons) ... manual version
Additional cost for electric trolley for sheet weights ≥ 350 kg (large format 10 mm)
Additional cost for electric crane arm swivel for sheet weights ≥ 350 kg (large format 10 mm)
VacuMaster special for use with storemaster® drawer systems with a max. of 750 kg

storemaster heavy-duty drawer rack system: MasterTower SL 19 (TwenTower base)
Surface: Frame zinc-plated and drawers painted according to NCS-S6500-N (dark gray)
Item in stock
Drawing No.:
1 shelf block for large-format sheet packs, consisting of:
2 side walls 2,200 x 1,785 x 1,000 + welded top plate 220/100/10
19 welded rails in a 100 mm grid
4 side doors made of HEB100x2 200x1,535x650 with hinges
1 top beam pair: front 1x HEB 180 x 3,730 mm
rear 1 x IPE 180 x 3,810 mm
each with 4 supporting deep-web girders IPE 80 x 1,500 mm
1 frame extensions: 1,500x1,785x3,810
front 2 x HEB 140 x 1,500 (with 1,500 -C85SL length)
rear 2 x IPE 180 x 1,500 (with 1,500 -C85SL length)
each with 4 supporting deep-web girders IPE 80 x 1,500 mm
3 bracket beam levels IPE 120 x 1,100 with flange plate incl. end face
each with 4 connecting bolts (1 piece per bracket arm shoe)
each with 2 attached head-deep girders UNP 120 x 1,714 mm
each with 2 insert deep girders IPE 80x 1,572 mm
1 top beam pair
front 1x HEB 100 x 3,730 mm
rear 1 x HEB 100 x 3,810 mm
each with 4 supporting deep-web girders IPE 80 x 1,500 mm
19 drawers St-rollers UNP 80 x 3,300 x 1,750 (H*W*D) with ryt gf tiv 080 43
6 recessed deep-web girders QR 40/4, 3 mm from UK
1 tower crane, with electric rotation, electric travel and electric lifting, consisting of: a crane column QR 140/14 x 3,740 mm long (mounted on the right side), a pivoting crane 6,000 mm nominal length x 225° x 500 kg
1 VacuSheet - vacuum lifting device x 750 kg
1 machine nameplate
1 operating manual

VacuMaster Basic and VacuMaster Comfort
Technical data
Due to its modular design, the VacuMaster Basic and VacuMaster Comfort can be individually configured for any application. The technical data of the device depend on the chosen configuration.
Below, you can determine initial technical parameters for your VacuMaster based on preconfigured lifting devices for standard workpiece formats.

Here's how to proceed:
1. Select the type of handling: e.g. Horizontal handling
2. Select the maximum load capacity: e.g. 250 kg
3. Select the workpiece format: e.g. 2,000 x 1,000 mm

Condition: good
Available: immediately
Location: 87719 Mindelheim

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.