نیمه تریلر کمپرسی

STAS ferroSTAR 68 cbm

Kingpin load (t) 12
Axle load (t) 8
Axle base (mm) 1310-1310
Fifth wheel height (mm) 1150
Chassis width (mm) 1400
Technical permissible total weight 39=12 9 9 9
Internal height front (mm) (IHF) 2460
Internal height rear (mm) (IHB) 2460
Overall width (mm) 2550
Wheelbase (mm) 7753
Overall length (mm) 13127.6834

Chassis
Chassis material: Steel
Tire size: 385/65R22.5
Axles: SAF Intra
Brake type: SAF - SBS 2220
Optional 1st axle with lift axle and traction control
Traction control activated via Button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times.
Brake pad wear indicator connected.
Air bellows protection plate.
Wabco Trailerpulse tire pressure monitoring.
ECAS air suspension with raising and lowering valve.
Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis.
Pneumatic coupling head: European Palm coupling.
Alcoa Dura Bright rims.
Chrome-plated wheel nut caps.
Landing gears: Steel geared landing gears mounted at the front of the chassis, type JOST MODUL, with one-sided operation and 2 speed settings.
Manual underrun bar operation.
Black underrun bar mud flaps with STAS logo, mounted across the entire width of the underrun bar.
EBS control panel: Left side, in front of the axles.
Plastic toolbox on the left.
Lighting type: ECOLED. II
Work lights (switch operated) with two LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp holder.
Work lights (switch operated) with two LED reversing lights at the front, left and right in the direction of travel, mounted in the area of the landing gear.

Tilt cylinder brand: Hyva
Tilt cylinder type: Hydraulic cylinder with small casing.
Cylinder tilt angle: Normal ±47°
Tilt cylinder model: Hyva - FC 169
Tilt cylinder stroke: 8130
Tilt cylinder max. pressure: 170
Hydraulic coupling: Swivel coupling, size 1, female, hose 2,100 mm
Standard smart board
Aluminum leaning ladder, 2.8 m long, mounted on the right in the direction of travel.
Broom and shovel holders are positioned on the front wall, left in the direction of travel.
Broom and shovel holders, each with three holders, are positioned on the chassis, left in the direction of travel.
Loading pressure gauge Ø 100 mm - on the front Mounted on the chassis
Safety device chassis - body rubber pads
Air and electrical console right

Dwsdpfxjwlxr No Aftsc
Body
Rear wall type wing doors
A-plate foldable on the door, on the right in the direction of travel
Floor made of 5 mm HB450
Rubber pads attached below the floor cross members
End wall made of 3 mm HB450
Side wall made of 4/3 mm HB450
Rear wall made of 3 mm HB450
Number of hinges on rear wall: 3 pairs of door hinges
Design of wing door: 1/2 to 1/2, with 1 scrap lock
Door leaf opening: Right door leaf opens first (STAS manufacturer's choice)
Opened door leaves are secured with a chain
Rear wall seal: Rubber seal in the lower area, extending to 1,000 mm on the side
Additional rear wall locking: Pneumatic, double-acting
Operation of the Additional locking mechanism manually operated on the side of the dashboard.
Tarpaulin wrap design: Wrap tube.
Type: Steel bow, trapezoidal design, foldable.
Number and position of bows: 3. Center bow, evenly distributed across the entire loading area.
Tarpaulin holders, rotatable, removable. 3.
Front wall tarpaulin tube support in

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.