نیمه تریلی با کف متحرک
STAS 13.50 "ECOhddisc93" 92,5m³

قیمت ثابت به اضافه مالیات بر ارزش افزوده
‎€۲۲٬۶۸۰
وضعیت
کارکرده
موقعیت
Korschenbroich-Glehn آلمان
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
نیمه تریلی با کف متحرک STAS 13.50 "ECOhddisc93"   92,5m³
more Images
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50

اطلاعات پایه

نام دستگاه:
نیمه تریلی با کف متحرک
تولید کننده:
STAS
مدل:
13.50 "ECOhddisc93" 92,5m³
وضعیت:
کارکرده

قیمت و مکان

قیمت ثابت به اضافه مالیات بر ارزش افزوده
‎€۲۲٬۶۸۰
محل فروشنده:
Dieselstr. 9, 41352 Korschenbroich-Glehn, آلمان آلمان
تماس بگیرید

جزئیات فنی

ابعاد و وزن

حجم فضای بارگیری:
۹۳ متر مکعب
طول فضای بارگیری:
۱۳٬۵۳۵ میلی‌متر
عرض فضای بارگیری:
۲٬۴۸۰ میلی‌متر
ارتفاع فضای بارگیری:
۲٬۸۲۵ میلی‌متر

محورها و چرخ‌ها

پیکربندی محور:
3 محور

جزئیات بیشتر

ثبت‌نام اولیه:
۱۲/۲۰۱۸

جزئیات پیشنهاد

شناسه آگهی:
A23344004
شماره مرجع:
4430
به‌روزرسانی:
آخرین به‌روزرسانی در ۲۶.۰۸.۱۴۰۵

توضیحات

Chassis: Reinforced, continuous chassis design, new.
Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg).

Axles and Suspension: "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display), 1st axle can be lifted with starting aid (new EC regulation, without control unit option).

Tires and Wheels:
Iede Akp Rfspfx Adwstp
6 wheels with tires size 385/65 R 22.5, approx. 50-60% tread, on Alcoa DuraBright rims? 11.75x22.5 ET 120

Kingpin:
2" bolted into a 10 mm thick plate.

Landing Gears:
Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot.

Braking System:
According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system.

Electrical System:
According to the guidelines of the EC standard 91/633 and 97/28 with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile, 2 separate LED reversing lights on the side approx. at landing gear height.

Superstructure/Body: "Body fully welded inside", reinforced side walls.
Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn, aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system on 140 mm ALU cross members, floor load approx. 9 tons/m2, cross members mounted close together (approx. 350mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 rotary latch locks, mounted in the welded aluminum rear frame on Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, moving remainder unloading wall with Kevlar sheet approx. 1,800 mm long plus side Kevlar sheet sealing, aluminum wear plates on the side and rear approx. 2,000x1,500x4mm.

Hydraulic System: "Cargo - Floor" Sliding Floor System
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lift slide bearings, type CF, 10 mm floor, ribbed design, hydraulics with approx. 200 mm working stroke, fixed points type "Faster" with high hydraulic locks mounted on the front wall, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated in a lockable, waterproof box, wear corners at the rear of the floor end.

Accessories:
6 PVC mudguards with

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.

تأمین‌کننده

ثبت شده از: 2002

۱۸ آگهی‌های آنلاین

تماس بگیرید

ارسال درخواست

زمینus 
آلمان
اتریش
سوئیس
ایالات متحده آمریکا
بریتانیا
فرانسه
بلژیک
اسپانیا
مکزیک
ایتالیا
هلند
لهستان
فدراسیون روسیه
بلاروس (جمهوری بلاروس)
اوکراین
استونی
ترکیه
نیوزیلند
ایرلند
جمهوری چک
دانمارک
فنلاند
سوئد
نروژ
لوکزامبورگ
یونان
لیتوانی
لتونی
ایسلند
پرتغال
برزیل
ونزوئلا
آرژانتین
مجارستان
اسلواکی
رومانیہ
مولداوی
اسلوونی
صربستان
مونته‌نگرو
آلبانی
کرواسی
بلغارستان
مقدونیه شمالی
بوسنی و هرزگوین
اسرائیل
مصر
مراکش
هند
اندونزی
کره جنوبی
ژاپن
تایلند
مالزی
ویتنام
چین، جمهوری خلق
تایوان
ایران
بنگلادش
توجه: درخواست شما به همه فروشندگان دسته‌بندی ماشین‌آلات ارسال خواهد شد. با این کار می‌توانید تعداد زیادی پیشنهاد دریافت کنید.
درخواست ارسال نشد. لطفاً بعداً دوباره تلاش کنید.

تلفن & فکس

+49 2182 ... آگهی‌ها