Slotting head for milling machine CCCP / USSR, to be mounted in place of the vertical milling head,

STANKO 1502

Keyway milling head for milling machine, milling head, CCCP / USSR STANKO Type 1502
No.: 200 Year of manufacture: 1974
Stroke size: max. 60 mm
Nwsded Dk A Aepfx Ankjl
Stroke rate: approx. 200 - 500 strokes/min.
Tool holder: 12 x 17 mm with clamping plate
Hole spacing machine flange plate: 245 x 185 mm
Mounting hole: Ø 17 mm
Centering diameter on the machine flange plate: 190 mm
- Stroke size adjustable via eccentric adjustment
- The drive is the same as for the standard vertical head, driven by the machine gearbox
- Drive via a drive pin, centered within the centering diameter
- Graduated scale on the flange plate, +/- 45° infinitely adjustable
- This keyway milling head is flanged in place of the standard vertical milling head
(Mounting in place of the vertical milling head)
Weight: 42 kg
Good condition

Keyway milling head, bearing number 58166, and vertical milling head, bearing number 58164, from an identical STANKO milling machine.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.