Heavy-duty lathe Seiger SLZ 1200 x 3000 with Siemens cycle control

Seiger SLZ 1200 x 3000

Heavy Duty Lathe Seiger SLZ 1200 x 3000
with Siemens Sinumerik 810D Cycle Control (Teach-In)
The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.
Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.
Working Area
Distance between centers: 3,000 mm

Swing diameter over bed: 1,200 mm

Swing diameter over cross slide: 850 mm

Cross slide travel: 620 mm

Bed width: 750 mm

Spindle
Spindle nose: DIN 55027 size 11

Spindle diameter front bearing: 190 mm

Spindle bore: 104 mm

Speed range: 5 – 900 min⁻¹

Max. torque: 6,000 Nm

Main Drive
Drive power: 37 / 52 kW (100% / 60% duty cycle)

Feed
X-axis feed force: 24,000 N

Z-axis feed force: 16,000 N

Rapid traverse X: 7 m/min

Rapid traverse Z: 4 m/min

Hodpszdd E Rjfx Anisnu
Tool Holder
Turning tool cross-section: 40 × 40 mm

Electrical Data
Supply voltage: 400 V

Frequency: 50 Hz

Max. current consumption: 200 A

Workpiece Weights
(Manufacturer specifications for standard configuration)
Between centers without steady rest: 5,000 kg

Between centers with 1 steady rest: 6,000 kg

Between centers with 2 steady rests: 7,000 kg

Flying in faceplate: 1,800 kg

Chip Conveyor
2 x AME Chip Conveyors
Manufacturer: AME GmbH, Emsdetten

Type: S8 300 Tlg. 63

Year of manufacture: 05/2016

Not Included:
Tailstock

Steady rests

Note
The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible.

Serial number: 990101
Tip width: 3000 - mm
Turning diameter max.: 850 mm
Control: • Siemens Sinumerik 810D
Weight approx.: 18,500 kg
Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm
Year of construction: 2,000
Condition: in working order
Terms of payment: 100% prepayment before pick-up
Terms of delivery: From foundation
under power: No