Continuous shot blasting machine

Schlick roto-jet RB 1500-5.3-4/11

Schlick roto-jet blasting system, type RB 1500 – 5.3-4/11, equipped with 4 blasting turbines at 11 kW each, is suitable for blasting and descaling steel profiles and sheets, including a blow-off system and a brushing system.

The maximum loading width is 1500 mm, and the maximum passage height is 500 mm. The system is sold with a short infeed roller conveyor and a short outfeed roller conveyor, each 3.8 m in length. This Schlick continuous blasting system is in good working condition and will be available from May 2027.

System scope:

* Blasting system
* Brushing system
* Blow-off system
* Cartridge filter system with 12 filter cartridges
* Infeed and outfeed roller conveyors, each 3.8 m long, powered
* Collection tray for blasting media on the outfeed side of the roller conveyor

The blasting system is designed for:
Sheets

* max. width: 1500 mm
* max. thickness: 50 mm
* min. thickness: 6 mm
* max. passage height: 500 mm
* min. component length: 2000 mm or conveyance on a frame

Profiles up to max. IPB 1000
Gsdj Akib Topfx Akzokd

Technical data RB 1500-5.3-4/11:

* 4 x turbine, each 11 kW, type 5.3-EM 11.0
* Sheet passage speed: approx. 1.6 m/min
* Profile passage speed: approx. 1.3 m/min
* Blasting media throughput: approx. 180 kg/min
* Power data: total 66.5 kW
* Filter fan: 7.5 kW
* Blow-off station: 5.5 kW
* Bucket elevator: 3.0 kW
* Longitudinal screw conveyor: 3.0 kW
* Turbines: 44 kW
* Lifting device for cleaning: 0.75 kW
* Brush cleaning: 2.2 kW
* Roller conveyor drive: 0.5 kW

Compressed air requirement for cartridge filter system: 23 m3/h, pneumatic control: 1 m3/h

Sound pressure level: ≤ 90 dB

Conveying system for sheets and profiles:

* Infeed roller conveyor: 3.8 m
* Outfeed roller conveyor: 3.8 m
* Roller conveyor loading height: 950 mm

Control: Siemens OP7

Foundation: Recess under the blasting system: 1200x3100x420 mm (LxWxH)

Dimensions:

With foundation recess, system height 5300 mm

Without foundation recess, system height 5720 mm. In this case, the roller conveyors would have to be supported by 420 mm.

Overall length of machine with infeed and outfeed roller conveyors: approx. 14,460 mm

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.