Press brake

Safan E-Brake 80-2550

SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes.

SAFAN E-Brake Servo-Electric Press Brake
Force: 800 kN (80 tons)
CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2
Ram Stroke: 290 mm
Open Height (Daylight): 590 mm
Upper Beam Approach Speed: 90 mm/s
Upper Beam Accuracy: +/- 0.01 mm
Maximum Backgauge Finger Speed: 350 mm/s
Maximum Backgauge Range (third reference point, X-axis): 1000 mm
Hydraulic Upper Tool Clamping: WILA
Connected Load: 11 kW
Machine Weight: 6,350 kg
Codpfxout S E No Af Depw
Machine Width: 3,450 mm
Machine Depth: 1,820 mm
Machine Height: 2,510 mm
Power Supply: 3/N/PE 50Hz – 400/230V
Servo-electric drive (no hydraulic system)
Drive transmission via belts

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.