Centrifugal Fan

Reitz MSE 025-016030-00

Convey grain, pellets, biomass, or other dry bulk materials pneumatically using a heavy-duty industrial fan, when lightweight extraction fans are insufficient.

This Reitz Umwelttechnik fan was used for pneumatic material conveying in our own facility and is fully functional. It has a flow rate of approximately 9,600-10,000 m³/h, direct drive, and a 700 kg welded steel construction mounted on a mobile, liftable base frame. Nameplate photos and technical documentation are available; inspections are welcome.

Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited; loading this 700 kg unit must be scheduled.

Best for: pneumatic conveying of dry bulk material, high-volume industrial ventilation, and process air where lightweight extraction fans are inadequate.

Not suitable for: wet or sticky materials, air above 80°C, or applications requiring formal ATEX certification unless independently verified.

What the specifications mean in practice:
• 160-167 m³/min (~9,600-10,000 m³/h) - provides sufficient airflow to convey material through piping, not just extract dust.
• 223-250 daPa total pressure increase - maintains material flow over distance and through bends.
• Direct-driven 24.5/28 kW motor - eliminates the need to tension, align, or replace belts.
• 700 kg welded steel housing, backward-curved impeller - designed for continuous industrial operation.
• Mobile, liftable base frame - can be moved into position using a forklift or crane.
• Max. 80°C, up to 3100 rpm - suitable for ambient and moderately warm process air.

What you get: the complete fan unit with backward-curved impeller, motorenmaier 24.5/28 kW three-phase motor (IP55, 400/690V), and welded base frame, ready for connection.

Note: the safety plate refers to explosion-protection instructions. If formal ATEX certification is relevant to your application, it should be independently verified.
Technical data (from nameplate):

Manufacturer: Reitz Umwelttechnik | Type: MSE 025-016030-00 | Serial/Year: 567856 / 2009
Volume flow: 160-167 m³/min (~9,600-10,000 m³/h) | Total pressure increase: 223-250 daPa | Shaft power: 8.7-11 kW
Speed: 2915-2925 rpm (max. 3100) | Max. temperature: 80°C

Drive motor: motorenmaier gmbh, Type 7AA160L-02V, 24.5/28kW, 2-pole, IP55, 400/690V | Weight: 700 kg
Condition: Used, functional, previously used for pneumatic material conveying.

Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement).

Buy with confidence: manufactured in 2009 (serial 567856) by a reputable German manufacturer, used in our own facility, fully functional, and can be tested before pickup. Nameplate photos and technical documentation are available; in-person inspections are possible in Kerns OW by appointment. You can verify the identity, condition, and operation before making a purchase.

Tsdpfozx Ebzox Aggjb
Why buy now: this is a single, used machine, not stock – once sold, this specific configuration is no longer available; a 700 kg fan on a base frame is not an item we typically restock.

First-buyer bonus: free loading with our forklift at no extra cost. Valid until September 9, 2026, or until sold.

Action: please provide your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.