RALC CTS CONNI CUTTING DEBURRING RALC LYBRA 450 + RALC SDB 100 – 5000

RALC CTS CONNI CUTTING DEBURRING RALC LYBRA 450 + RALC SDB 100...

Complete LOADING, CUTTING & DEBURRING LINE & UNLOADING, manufactured by RALC CTS CONNI

OPTIONAL : AUTOMATIC ROBOTIC BUNDLING SYSTEM in squares/hexagonal bundles, with exit carriage and safety areas

Model RALC LYBRA 450 + RALC SDB 100 – 5000

- Cutting range: 40-140mm
- Bundle loader: 6,000mm - 12,300mm x 5Tn
- Unloading: Up to 5,000mm
- Optional: Automatic robotic packing system

BUNDLE SPECIFICATIONS:

Weight at loader: 5000 Kg

Diameter max.: 600 mm

Min. – max. tube length at entry: 6000 – 12300 mm

Max. bending of the tubes at entry: 1.5 mm/m

CUTTING

Possible diameters with loader:

- Rounds : 40 – 140 mm
- Squares : 40x40 – 135x135 mm
- Rectangles : 50x25 – 200x80 mm

Max. tube weight: 200 kg

Feeding speed: 10 - 60 m/min

Cutting disc diameter: 350-400-450 mm

Disc holding acc. to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm

Max. tube length at exit: 5000 mm

DEBURRING

Deburring unit
Hedpfovt Tzcox Ahusi

Dimensions:

- Rounds diameter: 20 – 102 mm
- Squares: 30x30 – 70x70 mm
- Rectangles: 40x20 – 80x50 mm

Length: 500 – 5000 mm

Material: St 37 acc, DIN17100

Max. bending of tubes at deburring: 2 mm/m

Brush diameter: 300 mm

Brush width: 600 mm

Steel wire diameter: 0.35 mm

Power: 3x400/50 V/Hz

MITRE CUTTING

With manual loading, it is also possible to make MITRE CUTTING

Cutting Capacity (without loader)

Round tube:

- At 90º: 100 – 125 – 145 mm
- At 45º: 90 – 115 – 135 mm
- At 30º: 80 – 95 – 110 mm

Squares:

- At 90º: 90 – 110 – 130 mm
- At 45º: 80 – 100 – 110 mm
- At 30º: 70 – 80 – 90 mm

Rectangles:

- At 90º: 140x70 – 160x90 – 180x110 mm
- At 45º: 110x60 – 130x70 – 150x70 mm
- At 30º: 80x40 – 100x50 – 110x60 mm

SCOPE OF SUPPLY

1. Loader Mod. CM5FT12 for 5000 kg bundle from 5000 to 12300 mm length

2. Cutting unit Mod. LYBRA C450 with:

- Micro-lubrication
- Air blowing
- Chips conveyor
- Tilting carriage
- Unloading clamp

3. Deburring unit Mod. SDB100 5000

4. Exit collecting cradle with endless slings

5. Complete electrics & hydraulics

6. Existing documentation *

7. Existing spares *

*To be checked before order

OPTION : Front collecting automatic portal with robot, capable of packing round, square, or rectangular tubes in hexagonal or square bundles
Cutting range: 40 - 140 mm
Bundle loader: 6.000 mm - 12.300 mm x 5 Tn
Unloading: Up to 5.000 mm
Optional: Automatic robotic packing system
Bundle weight at loader: 5000 Kg
Bundle diameter max.: 600 mm
Tube length at entry: 6.000 – 12.300 mm
Bending of the tubes at entry: Max. 1.5 mm/m
CUTTING Possible diameters with loader, rounds: 40 – 140 mm
CUTTING Possible dimensions with loader, squares: 40x40 – 135x135 mm
CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm
Tube weight: Max. 200 kg
Feeding speed: 10 - 60 m/min
Cutting disc diameter: 350 - 400 - 450 mm
Tube length at exit: Max. 5.000 mm
DEBURRING Rounds diameter: 20 – 102 mm
DEBURRING Squares dimensions: 30x30 – 70x70 mm
DEBURRING Rectangles dimensions: 40x20 – 80x50 mm
Length: 500 – 5000 mm
Material: St 37 acc, DIN17100
Max. bending of tubes at deburring: 2 mm/m
Brush diameter: 300 mm
Brush width: 600 mm
Steel wire diameter: 0.35 mm
Power: 3x400/50 V/Hz