5 axes universal machining center

QUASER UX 500 C

QUASER UX 500 C
5-Axis Universal Machining Center

Year of manufacture: 2022
Control system: SIEMENS S828D
Travel distances: X – 712 mm / Y – 508 mm / Z – 515 mm
A-axis (swivel axis): +30/-120°
C-axis (rotational axis): 360°
ONLY approx. 1,500 spindle hours (as of March 25, 2026)

Equipment:
SIEMENS S828D / PPU 290 with 15-inch touchscreen and movable control panel, tiltable and rotatable
Software option: 3D simulation
Software option: Network drive management
including temperature-controlled cooling system
Portable electronic handwheel
Heat exchanger for control cabinet system
Dual-arm tool changer with 48 storage locations
Pneumatically operated tool change door
High-precision option: glass scales in X/Y/Z
including overpressure system to prevent contamination
Direct path measuring system in the rotary axis
Direct path measuring system in the swivel axis
Main spindle: SIEMENS SK40 with 12,000 rpm, 13.3 kW / 85 Nm
(S6-25%) coupled, SC-4.2
including temperature-controlled cooling system
including internal coolant supply
with Grundfos pump, 20 bar, 25 l/min
including cartridge filter 25 µm
Infrared receiver for workpiece and tool measurement
3D infrared probe RENISHAW OMP 40-2
for workpiece measurement, including software option for in-process measurement cycles
Tool setter OTS for tool measurement, including quick-change adapter
Software option: Kinematics measurement cycle 996
Software option: Measurement cycles for workpiece control and measurement / automatic operation
Hjdey Uhcpjpfx Am Den
Three-color signal light
Cartridge filter for ring cooling and chip flushing
Coolant spray gun
Rotary through spindle Deublin
External compressed air for dry machining
Additional compressed air can be switched on through the spindle via M-function
Automatic hybrid central lubrication for guides and ball screws
Scraper conveyor for universal applications, short to medium-length chips
Chip disposal system, consisting of work area chip flushing
with Grundfos pump 75 l/min at 3 bar
Chip augers made of stainless steel and 2 screw conveyors in the work area
Full work area protection with 2 hinged viewing doors
2 work area lights
Flood cooling with 10 outlets arranged in a ring around the spindle nose, via Grundfos pump, 75 l/min at 3 bar
Warm-up tool
Spindle cooling oil Mobil Velocite Oil No. 3

Included in delivery:
Spring-loaded 2-jaw power chuck, manufacturer SCHUNK
Model KSF3-250
approx. 70 tool holders, some with tools installed
Chip cart
Operating manual/documentation
Machine parameters on USB stick

Technical data, transport & manufacturer's brochure – see PDF. All technical data, images and content are non-binding and without guarantee. Subject to change, errors and omissions.

All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice.

FCA (Free on Truck) D-32457 Porta Westfalica
packaging only
Delivery time: immediate
Subject to prior sale / Payment immediately upon completion of purchase.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.