Vertical machining center

PRIMINER VF 1300

Machine with only 187 spindle hours!

The new price of the machine was approximately €140,000 in 2023!

No tools or a vise are included. However, these can be acquired upon request.

TECHNICAL DETAILS

Travel X-axis: 1,300 mm
Travel Y-axis: 650 mm
Travel Z-axis: 600 mm

Spindle speed: 15,000 rpm
Main spindle servo motor Siemens: 20/53 kW
Main spindle servo motor Fanuc: 15/30 kW
Spindle taper: SK 40

Work table
Table dimensions: 1,500 × 650 mm
Table load: max. 1,200 kg
T-slots: 18 × 5 × 100 mm
Distance spindle to table surface: 150–750 mm
Distance spindle center to Z-axis cover: 697 mm

Rapid traverse X/Y-axis: 36 m/min
Rapid traverse Z-axis: 36 m/min
Working feed rate: max. 1–12,000 mm/min
Feed motors X/Y/Z: 3.2/3.2/4.3 kW
Torque of feed motors X/Y/Z: 20/20/27 Nm

Tool positions: 28
Tool length: max. 300 mm
Tool diameter: max. 75 mm
Tool diameter with free adjacent positions: max. 125 mm
Tool weight: max. 8 kg
Tool change time: 1.6 s

MACHINE DETAILS

Control system: Heidenhain TNC-460

Accuracy without linear glass scales
Positioning accuracy over the entire travel range: 0.012 mm
Repeatability accuracy over the entire travel range: 0.008 mm

Accuracy with linear glass scales
Positioning accuracy over the entire travel range: 0.008 mm
Repeatability accuracy over the entire travel range: 0.006 mm

Cooling and power supply
Coolant tank volume: 250 l
Coolant flow rate: 40 l/min
Mains voltage: 400 V ± 10 %
Number of phases: 3
Mains frequency: 50 Hz
Connected load: 85 kVA

Dimensions and weight
Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm
Weight: 8,000 kg

Operating hours
Spindle hours: 187 h
Machine operating hours: 773 h
Control operating hours: 1,165 h

EQUIPMENT
Direct drive
Double-arm tool changer
O-BLUM tool measuring system Lasercontrol NT
O-BLUM workpiece measuring system TC50
Electronic handwheel (MPG)
Tapping without draw-in collet
USB interface
CF card interface
Ethernet interface
HIWIN linear guides with roller guides in all axes
HIWIN ball screw drives
Directly driven main spindle
NSK/FAG main spindle bearings
Separate oil-air spindle cooling unit
Fully enclosed tool changer for protection against chips
Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop
Fully enclosed splash guard
Separate air conditioning system for heat dissipation