Gear hobbing machine

Pfauter PE 800

The perfect retrofit machine! Mechanically in phenomenal condition!

This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints.

Please refer to the attached KLINGELNBERG inspection reports available for download.

Gleason P 800
Year of manufacture: 1995
Control: SIEMENS 840 C (discontinued)
Condition: Mechanically in excellent condition
Functionality: Fully operational
Inspection: Available under power

Technical Data:
Lodpfxsy Hfm Ne Almjrp
Nominal workpiece diameter: 800 mm
Max. workpiece diameter: 800 mm
Max. workpiece diameter, special version: 1,200 mm
Nominal module: 20 / 30 mm
Nominal module, special version: 25 / 35 mm
Drive power: 35 kW
Drive power, special version: 52 kW
Cutter head speed range: 20 - 200 rpm
Cutter head speed range, special version: 26 - 265 rpm
Additional cutter head speed range, special version: 36 - 360 rpm
Cutter head swivel range: +30 / -45 degrees
Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm
Min./max. center distance workpiece/tool: 50 / 600 mm
Center distance workpiece/tool, special version: 50 / 800 mm
Max. axial slide travel: 700 mm
Max. axial slide travel, special version: 1,000 mm
Max. axial slide travel, special version: 1,300 mm
Lowest cutter head position above table: 450 mm
Table diameter: 800 mm
Table bore diameter: 245 mm
Table bore depth: 875 mm
Max. table speed: 15 rpm
Max. table load: 10,000 kg

Machine dimensions:
Width A: 5,800 mm
Length B: 6,900 mm
Height C: 4,700 mm
Machine weight: 22,000 kg

Regarding the current KLINGELNBERG gear inspection data BEFORE grinding:

"Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.