Band saw

PEGAS-GONDA 150x200 GHE-R

This is a demonstration machine used by the PEGAS-GONDA manufacturer in their showroom solely for customer demonstrations. The saw has not been used in regular production. The machine is suitable for industrial piece and small-batch production, for cutting solid materials and profiles, and for perpendicular and angled cuts.

The saw operates in a gravity mode – the working movement of the arm is ensured by the arm's own weight, and the cutting feed is regulated by a control lever on the hydraulic cylinder. After the cut is completed, the movement of the saw blade automatically stops. The arm is raised manually.

The main advantages of the machine:

robust cast iron construction of the arm, vice, and swivel base,
adjustment of angled cuts in the range of 0° to +45° to the right,
quick angle adjustment using a quick-release lever,
manual vice with quick-release,
Kjdpszinb Esfx Ankjdu
blade guidance in carbide plates,
automatic saw blade tension control,
two-speed motor,
cooling system with coolant distribution to the saw blade guides,
stand with chip collection container,
24 V control.

Technical specifications:

Cutting capacity for round stock at 0°: 150 mm
Cutting capacity for profiles at 0°: 170 × 140 mm
Cutting capacity for round stock at 45°: 110 mm
Cutting capacity for profiles at 45°: 110 × 120 mm
Power supply: 3×400 V
Motor power: 0.6 / 0.8 kW
Blade speed: 40 / 75 m/min
Blade dimensions: 2060 × 20 × 0.9 mm
Weight: approx. 160 kg

Equipment:

adjustable stop,
saw blade,
set of tools for routine maintenance,
operating manual in electronic format.

The machine is available from the manufacturer, PEGAS-GONDA. Inspection is possible by prior arrangement.

Location of the machine: Slavkov u Brna, Czech Republic.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.