IN STOCK PRESS BRAKE 80X2500 OT-41

Otinus PBO-2580-CNC OT-41

Attention!! Special Offer!!
Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz.

A part of our machines is available IMMEDIATELTY.

Hydraulic press brake PBO-2580-CNC OT-41

Specifications
- Maximum bending thickness (S235): up to 4.0 mm
- Nominal bending force: 800 kN
- Maximum bending length: 2500 mm
- Throat depth: 250 mm
- Maximum stroke: 120 mm
- Daylight: 385 mm
- Distance between side frames: 2000 mm
- Backgauge travel distance: 600 mm
- Motor power output: 5.5 kW
- Length: 2600 mm
- Width: 1450 mm
- Height: 2300 mm
- Weight: 4500.0 kg

Tools
- Front supports: 2 pcs.
- Backgauge drive (travel along the X-axis): servo motor
- Ram drive (travel along the Y-axis): servo motor
- Backgauge fingers positioning (R-axis): manual
- Punch quick change tooling system form AMADA

Otinus CNC OT-41 control
The CNC controller Otinus is featured with convenient and intuitive menu. The software calculates the bending angle on its own. The large color touchscreen is readable from any angle.
The controller can store up to 2,000 programs of 30 steps each.

Top quality components
- Rexroth hydraulic valve
- Schneider electrical components
- Omron and Schneider safety circuit parts.
- Steel hydraulic line tubings
- Hydraulic lines made of steel instead of rubber reduce the risk of future leaks.

Safety
We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies.

The machines comes with carefully prepared instructions manual.
The machine has a CE marking and EU declaration of conformity.

Oil cooling system
The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation.

Assistance by a specialist
We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance.

Within the service, our technicians may:
- Specify the bending steps for intricate parts.
- Advise on material and gas selection
- Assist in the selection of operating parameters for different materials

Included in the machine price
2-day training including installation of the machine
- 1st day (up to 8 hours) - installation of the machine and learning to use the controller.
- 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client.
Telephone consultation with a specialist
Dsdpeh Ranljfx Ag Ijcr
- 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months

- Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine).

Terms of cooperation
- 24 month warranty
- The machine is brand new
- Warranty and post-warranty service provided by the seller
- The Client is responsible for the machine during unloading and transporting on-site