Milling machine

Optimum CNC-Fräsmaschine OPTImill F 105

Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with accessories (new, unused condition):

Includes accessories:
- CNC Tool Starter Set BT 40
- SPW 12 Clamping Tool Assortment, 58-piece
- Hydraulic Milling Vise HCV 105
- 20 liters of cutting and drilling emulsion AQUACUT C1
- Preparation for 4th axis

- Carousel tool changer with 12 tool positions
- All linear guides with stainless steel covers
- Automatic central lubrication
- Siemens main spindle motor
- Siemens servo drives on all axes (closed loop)
- Max. spindle speed 10,000 rpm
- Machine lamp in the working area
- Portable electronic handwheel with enable switch and emergency stop
- Coolant system with 120-liter tank
- Tool change is automatic or at the push of a button (electropneumatic tool clamping system)

Dimensions and weights:
Length approx. 2,164 mm
Width/depth approx. 1,860 mm
Height approx. 2,200 mm
Weight approx. 2,800 kg

Drilling/milling capacity:
Max. face mill diameter: 70 mm
Max. shank cutter size: 35 mm

Rapid traverse speed:
X-axis 15,000 mm/min
Y-axis 15,000 mm/min
Z-axis 15,000 mm/min

Electrical data:
Supply voltage 400 V
Network frequency 50 Hz

Electrical connection:
Total connected load 15 kVA

Horizontal milling table:
Length 800 mm
Width 320 mm
Distance vertical spindle to table min. 100 mm
Distance vertical spindle to table max. 600 mm
T-slot size 14 mm
Number of T-slots 3
T-slot spacing 100 mm
Max. table load 300 kg

Accuracy:
Repeatability ± 0.008 mm
Positioning accuracy ± 0.008 mm

Coolant system:
Coolant pump drive power: 650 W
Tank capacity 120 l

Pneumatic connection:
Operating pressure 7 bar

Travel range:
X-axis automatic 550 mm
Y-axis automatic 305 mm
Z-axis automatic 460 mm

Vertical spindle:
Spindle taper BT 40
Speed range 10 – 10,000 rpm
Motor power (continuous duty S1) 7.5 kW
Motor power (intermittent duty S6-30%) 11 kW
Motor torque (continuous duty S1) 48 Nm
Motor torque (30% duty cycle S6) 70 Nm

Feed motor torque:
X-axis continuous duty S1: 8 Nm
Y-axis continuous duty S1: 8 Nm
Z-axis continuous duty S1: 11 Nm

Tool changer:
Type: Carousel
Number of tool positions: 12
Max. tool diameter: 70 mm
Max. tool length: 300 mm
Max. tool weight: 6 kg
Tool change time (T to T): 7 s

CNC Tool Starter Set BT 40:
- 1 pc. face mill arbor, 27 mm mounting
- 1 pc. keyless drill chuck 1.5 – 16 mm
- 2 pcs. Weldon 6 mm / 20 mm
- 1 pc. each Weldon 8 mm / 10 mm / 12 mm / 16 mm
- 1 pc. adaptor BT 40 to MK 3
- 4 pcs. collet chuck ER 32
- 1 pc. collet chuck wrench ER 32
- 18-piece collet set ER 32
- 1 pc. height adjustment device
- 1 pc. assembly and tool presetting aid
Rsdpfjyxyhfsx Aftsr
- 15 pcs. pull studs

Hydraulic Milling Vise HCV 105:
- Robust design for milling
- Guide surfaces hardened and ground
- Booster system: low effort, high clamping force when tightening
- Wide clamping range with locating pin and various hole spacings
- Manufactured from high-quality stainless steel
- Long service life thanks to high quality
- High clamping force

Jaw height 42 mm
Jaw width 107 mm
Clamping width 170 mm
Length without handle 442 mm
Total height 107 mm
T-slots 16 mm
Clamping force 24.5 kN
Clamping pressure 2,500 kg

Dimensions and weights:
Weight approx. 22 kg

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.