EDM machine

OPS Ingersoll GANTRY EAGLE 500 Generalüberholt

Fully refurbished OPS Ingersoll Gantry 500 Wire EDM machine – in top technical and visual condition.

The machine has undergone a comprehensive and professional overhaul in our workshop and is in very good condition both technically and visually.

During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional inspection were performed using a laser measuring system.

The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced.

In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition.

The generator and the control system were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation.

Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll.

The machine is immediately ready for operation and is ideally suited for reliable production.

Technical data:
Ingersoll (OPS Ingersoll)
Wire EDM machine
OPS INGERSOLL GANTRY EAGLE 500
Year of manufacture 2009
Control system
EAGLE Powertec PC/NC 2060
MultiProg Powertec technology programming on PC/NC
Powertec Easy Burn quick programming
Powertec Handheld - multifunctional handheld device
Manual erosion with Powertec Handheld
High Speed Jump max. 18 m/min
Generator power 60 Amperes, EAGLE Powertec
Travel ranges (X, Y, Z) 525 x 400 x 450 mm
Gsdpfx Akoyrqpfszokd
Electrode changer 20-position pick-up disc changer
Working tank (W x D x H) 770 x 670 x 440 mm
Work table (W x D) 750 x 650 mm
Load capacity 1,000 kg
Accessories:
CO2 fire extinguishing system
Integrated cartridge filter system

Special equipment:
Linear measuring system in all axes (Z as standard)
09.11

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.