Turning-milling center

OKUMA MULTUS B300II

OSP-P300SA control system with LCD screen
Max. turning diameter 630 mm
Max. turning length 900 mm
X travel 580 mm (+480 / -20 mm)
Y travel 160 mm (+80 / -80 mm)
Z travel 935 mm
Spindle end A2-8
Spindle bore D80 mm
Main spindle speed 50 - 5000 rpm
C axis 360° (0.001 degrees)
B axis 225° (-30° / +195°; 0.001° increment)
Power of driven tools (5 min/cont.) VAC 11/7.5 kW
Milling spindle speed 50-6,000 rpm
Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm
HAS-A63 chuck
Number of tools: 40
Motor: 15/11 kW
Feed range: 0.001 – 1,000 mm/rev
Rapid traverse (X) 40 m/min
Rapid traverse (Z) 40 m/min
Rapid traverse (Y) 26 m/min
Tailstock travel: 1,000 mm
Tailstock taper: MT5
Power requirement:
Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm
Weight: 10,000 kg

Features, accessories
- Internal coolant supply: 20 bar
- Kitagawa B-212A8 12" chuck
- NC tailstock
- B-axis indexing in 0.001 degrees
- Coolant supply through the milling spindle
- Dual foot pedal
- Y-axis travel: 160 mm (+80 / -80 mm)
- Hydraulic Device
- Thermo-Friendly Concept - H1 TAS-S and TAS-C
- CAS - Collision Avoidance System
- *10 dB Coordinate Measurement (1 set)
- Control Software:
* Coordinate Transformation (1 set)
* Profile Generation (1 set)
* Coordinate Calculation (1 set)
* Coordinate Change, Rotation, and Copy (1 set)
* Realistic 3D Simulation (1 set)
* Cycle Time Monitoring (1 set)
* Load Monitoring (Main Spindle, Slide) (1 set)
* Program Run Monitoring (1 set)
* 2-Color Signal Lamps (1 set)
Chip conveyor
Coolant system
Gtsdpfjwrr Nhex Agmot
Machine feet
Documentation

The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.