CNC lathe

OKUMA LB3000EXII MYW800

CNC-controlled lathe with powered tools, chip conveyor, automatic tool measuring system, chip evacuation conveyor, and bar feeder.
Put into operation 11/2014
Control system OSP-P300L CNC with a 15" color touchscreen
Machine hours: Power-on time: 65,458 hours
as of 03/18/2026, NC operating time: 36,054 hours
Spindle rotation time: 19,533 hours
Cutting time: 16,582 hours
And increasing.
Power consumption 33.1 kVA
Technical data
Max. swing diameter 480 mm (approx. based on the current chip conveyor design)
Max. machining diameter 340 mm
Max. turning length 785 mm
Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103)
1x hard jaws (Schunk SHB-J 100)
Hydraulic through-bore cylinder SS 1770, draw tube
Main spindle
Spindle with JIS A2-6 interface, 80 mm bore, integrated motor
Speed range 45 - 5,000 rpm
Power/continuous operation 22 kW/15 kW
Continuously controlled C-axis, 3600 with 0.001° increment
Sub-spindle
Speed range 50 – 6,000 rpm
Power/continuous operation 11 kW/7.5 kW
Spindle with 140 mm interface, 62 mm bore, integrated motor
Continuously controlled C-axis, 360° with 0.001° increment
Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62)
Hydraulic through-bore cylinder SS1243, draw tube
Sub-spindle travel - NC axis W travel for W450: 595 mm
Spring-loaded part ejector from the sub-spindle
Overload protection for W-axis (drive torque)
Tailstock mounting in the sub-spindle
Turret
Number of tool positions 12, both fixed and powered BMT60 (not VDI)
Tool mounting in. 25 x 25 mm
Tool mounting out. diameter 40 mm
Powered tools
Drive power 7.1/4.1 kW
Speed range 45 – 6,000 rpm
Feed speeds
Rapid traverse in X and Z axes 25/30 m/min
Rapid traverse in C axis 200 rpm
Travels
X-axis 260 mm
Tedjz Hk R Uopfx Abxjc
Z-axis 510 mm
Y-axis 115 mm (+70 mm / -45 mm)
Machine data
Width 3330 mm – without bar feeder and chip conveyor
Depth 1800 mm
Height 2250 mm
Machine weight 5,250 kg

Accessories:
OSP-P300L Advanced One Touch CF-M-E package including:

Coordinate transformation function
Profile generation function
Advanced One Touch IGF
3D machining process simulation
Cutting time overrun check
Load monitoring (spindle, feed axes)
NC operation monitoring (including part counting)
Function for reducing cycle time
Hi-Cut Pro function
Spindle speed control function
High-pressure coolant, max. 20 bar, max. 50 l/min
Bar feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn.
FILTERMIST FX4002 extraction unit

Equipment for the machine:
Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle)
Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30
31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5
Grooved collets diameter (mm) 55-60-65
Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub-spindle)
Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30
31-32-34-35-36-39-38-40-41
Tool holders: Axial holder - 5X
Tool holder, turning - 5x
Tool holder, boring bar - 2x
Front-end drive, double-sided - 3x
Front-end drive, side - 3x
Reduction sleeve (manufactured from stock material)
Reduction - nylon diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52
The machine is regularly serviced.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.