Belt grinding / satin finishing machine

NS Maquinas ML100 ab € 9.900,--

The tube linishing / satin finishing machine – ML100 – is the perfect choice for finishing the surface of round, oval and elliptical tubes.

The ML planetary system enables the work without rotating the tube - delivering the best results on both bent and curved tubes.

The auto feeding system transports straight tubes safety and automatically through the finishing station, enabling a consistent and high productive tube polishing quality.

Minimum tube vibration even on the biggest lengths:

With the ML Planetary System the tube is not spinning. The abrasive belts rotate around the tube while it is safely transported by the feeding systems.

Straight or curved tubes polishing:

ML100 was designed to finish either straight tubes (automatically) or bent tubes (manually).

Quick set-up:

Simple to work with ML100 tube polishing machine. Automatic feeding is hinge mounted and easily removable for bent tube finishing.

Low heat:

The soft contact with abrasive belts with ML Planetary System has a very low heat on the tube surface, unlike other conventional systems.

Oval tubes:

Oval or elliptical tubes polishing or simply out-of-round tubes can be safety and consistently finished with ML100

Finishing after tube drilling:

Maximum adaptability of the abrasive belt to holes or graps in the material surface.

Technical Details - ML100:

Working capacity (Ø mm) 10 - 114
No. Stations 1
Abrasive belt dimensions (mm) (2x) 50x940
Abrasive belt speed (m/s) 3-22
Feeding speed (m/m) 1-5
Abrasive belts motor (kw) 3
Wheel motor (kw) 1.5
Feeding motor (kw) (2x) 0.12
Total power (kw) 5
Consumption (A) 11
Dust extraction connection (Ømm) 80
Guedpfod Hfnbex Adhsk
Dimensions (mm) 750x1000x1300
Weight (kg) 250