Grinding system for powder coatings

NEUMAN & ESSER ICM 19

2x ICM19

Standard system designed for operation at ambient temperatures of 5 °C - 30 °C

GA-drawing according to NEA standard arrangement
P&ID No.
EX-Protection PSR 11 + ATEX protective systems
Power Supply 380 V ± 5% - 50 Hz
Ljdpfx Aqjw Snm Uexohh
Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C.
(altitude of installation side < 500m a.s.l.)

Capacity Range
137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge

Nominal Capacity
319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation)

Details
for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³