Plug cylinder press with sheet for sheet insertion

Nebiolo Saturnia 65x95 cm

Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs.
very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise.
All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book.
The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD.
The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either.
Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money.
Really a nice product from Nebiolo even as it big brother Urania.
They have pull-lays but can easily turn over to push side lays.

Some specs:
Max paper size 650 x 950 mm
Min paper size 300 x 420 mm
Speed 1500 - 4000 imp/hour
Feeder pile height 550 mm
Delivery pile height 650 mm
Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value)
Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket.
Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW
Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm
Pgodpfotyyvwjx Al Nju
Weight net 4,800 kgs

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.