Refrigerant compressor

Mycom N25220LMC-LBM

Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours

For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems.

The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling.

Key specifications:
Manufacturer: Mayekawa (MYCOM)
Model: N2520LMC-LBM
Type: two-stage compressor
Refrigerant: ammonia (NH₃)
Refrigeration capacity: 490 kW
Oil cooler capacity: 179 kW
Operating parameters: -40°C / +35°C
Operating hours: only approximately 7000 hours
Cooling: thermosyphon
Dedpjzudabofx Ai Decn
Control cabinet: included
Soft starter: Danfoss – included
Drive power: the attached documentation shows a drive with a rated power of 315 kW.
Advantages of a two-stage compressor:

Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios.

• High efficiency at low temperatures – this solution works very well at temperatures around -40°C.
• High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems.
• Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio.
• Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability.
• Good energy efficiency at high compression – particularly important in systems operating at low temperatures.
• Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations.

Included:

The set for sale includes:

Mayekawa (MYCOM) N2520LMC-LBM compressor,
control cabinet,
Danfoss soft starter,
oil cooling system using a thermosyphon.
Only 7000 operating hours:

One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions.

Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter

Please contact me for details, technical documentation, photos, and the possibility to view the unit.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.