FLAT GRINDING MACHINE

Metallkraft FSM 2550

Surface grinding machine
Manufacturer: METALLKRAFT
Model: FSM 2550

Condition: New machine

with warranty

Technical data:
Table size (magnetic plate): 250 x 500mm
Maximum grinding surface: 265 x 540mm
Maximum distance spindle-table: 500mm
Handwheel graduation for the Z-axis: 0.02mm (5mm per revolution)
Automatic feed rate Z-axis: 0.5 – 20mm
Handwheel graduation for the Y-axis: 0.01mm (2mm per revolution)
Spindle speed: 2900 RPM
Spindle motor power: 1.5 kW / 400V
Hydraulic unit motor power: 0.75 kW / 400V
Feed rate X-axis: 5 – 25m/min
Crossfeed motor (Z): 0.15 kW / 400V
Rapid traverse speed Y-axis: 250mm/min
Maximum grinding wheel diameter: 205 x 20 x 31.7mm
Dimensions: 2250 x 1400 x 1800mm
Weight: 1350.00kg (net)

Standard equipment:
massive and stress-relieved machine body made of gray cast iron
X and Z axes with V- and flat guides
and high-quality Turcite-B guide rails
Spindle with class P4 tapered roller bearings guarantees
a runout accuracy of 2μ
manual adjustment in all axes via large
handwheels with vernier scale
electromagnetic clamping plate
including automatic demagnetization function
automatic, motorized feed in the cross axis (Z)
Control of the feed in the Z-axis via two potentiometers
(coarse feed / fine feed)
End position detection in the Z-axis via adjustable end stops
automatic, hydraulic feed in the longitudinal axis (X)
with adjustable stroke
Control of the feed rate in the X-axis
via manual hydraulic valve
Control panel mounted on the right side of the machine body
automatic central lubrication of all guide rails
painting in RAL 5017 and RAL 7035
operating manual with CE declaration of conformity

Scope of delivery:
Grinding wheel flange
manual balancing device
Balancing mandrel
Parallel dressing device with diamond dressing tool
Halogen work light IP65
Adjustable feet and operating tools
Standard grinding wheel (180 x 13 x 31.7mm)
Grinding wheels from 7 to 20 mm can be used

Blsdpfx Aled Rhpqe Tok
Vertical feed control AD5:
Selection of operating mode for vertical feed
(Rapid traverse / Feed / Fine adjustment in steps)
Selection of operating mode for the grinding process
(Manual / Semi-automatic / Automatic)
Selection of grinding type (Surface grinding / Plunge grinding)
Switching on/off of the retraction function at the end of the cycle
Switching on/off of the automatic shutdown function
at the end of the cycle
Numerical input field with digital display for:
Total grinding dimension, fine feed dimension,
Retraction, coarse feed adjustment, fine feed adjustment
Number of increments, number of idle strokes and finishing strokes,
Adjustment value for incremental fine adjustment

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.