Metal Bandsaw Double miter

MEBAswing 260 DG

Fast adjustment of mitre, stepless from 30°-150°. With indication to accuracy on scale. The swivel is directly above the intersection of the saw blade and the fixed vice jaw so that there is a datum measuring point which does no change with the mitre angle.

Positive stops at 30° + 45° left and right hand

Fast material clamping. Material is always clamped at 90° (parallel) regardless of angle to be cut.

Stepless cutting pressure regulation through weight of the heavy and rigid saw frame and the fine tuning depending on cross-section by hydraulic damping cylinder

Environmentally-friendly micro spray lubrication system
Dodpfjbi S Diex Afhsul

Chip box inside

Saw blade drive with end of cut stop

Precise saw blade carbide-roller guidance

Colour silver grey / blue grey (RAL 7001 / RAL 7031)

1 bandsaw blade 4/6 tpi

Instruction manual and spare parts list on CD-ROM

Additional standard equipment
Hydraulic lift up of saw frame

Model
Manual

Miter
30° left Ø 130mm; square 120x120mm
45° left Ø 200mm; square 180x180mm
90° Ø 260mm; square 300x260mm
45° right Ø 200mm; square 180x180mm
30° right Ø 130mm; square 120x120mm

Motor:[kW] 1,8
Saw blade: [mm]3350x27x0,9
Speed: 35/75 m/min
Working heigt:[mm] 900