کامیون با کاربری خاص

MAN TGS 35.520 8x4 Hydro, Kran Fassi F805 TECHNO

MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!!
Tipmatik - Automatic transmission

8x4 Hydrodrive
Three steered axles
STEERING/LIFT axle

Front outriggers approx. 14,000 KG

Superstructure: flatbed with sideboards
6200x2550x600 mm

Steps
Diamond plate floor
Removable sideboards
9 x LED lights
Extendable overwidth markings up to 3500 mm width
Start/Stop
Rotating beacon
8 x rung pockets
6 x lashing points 6500daN
Tool boxes
Tow hitch
Storage compartments
Fgsdpszcr N Uofx Amxoc
Storage boxes
20 ft container locking
Perforated side profile lashing points 2500daN

Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model

Slewing range endless
All hydraulic cylinders are double-acting
Piston rods hard-chromed
Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°)
Electronic overload protection system with FX800
FASSI stability control FSC-S/2 incl. LMB II
Emergency shut-off, as well as optical alarm (90% and 100%)
Pressure relief and load holding valves
XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift)
RCH or RCS radio remote control with linear levers and display of
Pressure range (in bar and %) and 90% + 100% warning on the display
Danfoss D900 control unit with 4 control valves mounted on the crane pillar
Emergency operation for crane control
High-pressure filter is supplied pre-plumbed
Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base
Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m,
Outriggers operable by radio
Standard color RAL 3020 traffic red - all cylinders painted black
IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control
Load hook and attachment bridles (short/500mm)
Driving position: folded across the direction of travel
Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V"

FASSI stability control FSC-TECHNO
Fassi V7S radio maxi - 8 linear levers
Proportional control unit » for the outriggers
180° hydraulically swiveling support legs / » on both sides
Preparation for operation with variable pump » (LS)
Control system for 2 additional functions with » 2 hose connections / hxp-techno
Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable
Jib Double Power (JDP)
Multi-coupling with cable duct » for Jib mounted for 2 functions
Control system for additional function » rope winch
Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical
Permanently mounted rope guide when operating with additional knuckle arm (Jib)
AWC - (Automatic winch Control) for crane » Automatic rope winch control
AWC - (Automatic winch Control) for JIB » Automatic rope winch control
Work lights operable via display or radio
1 LED work light mounted on the knuckle arm »
1 LED work light mounted on the Jib »
LED for 2 outriggers, not mounted » (crane)
LED for 2 outriggers, not mounted » (additional support frame)
Electrical rotary distributor with 14 » sliding contacts
1 zinc primer from 720RA to F820RA
"Zinc primer for JIB ""L42"""
Additional cost for Dinitrol application (

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.