Briquetting press, Briquetter aluminium

mütek MPP NEM 300

Production time appr. 4 months

Our best-selling briquetting press series
+ Tried and tested, simple technology for extremely low susceptibility to errors
+ 25 years of experience, further development and know-how
+ Several hundred machines in use with satisfied customers
Rcedpschqxxofx Am Dsb
+ Good price performance ratio

Throughput approx. Up to 200 kg per hour * strongly dependent on the material.

- in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion.
- in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion.

Technical specifications:

Motor: 7.5 KW + 0,55 kW Cooler
400 volts / 50 Hz / 3-phase,
Front bush: 125 mm,
Briquette stroke max .: 100 mm,
Briquette stroke opt .: 80 mm,
Pump: 80 liters,
Storage container approx. 0.5 qbm content (expandable),
Diameter: 1200 mm,
with agitator discharge,
Hydraulic unit complete with oil tank 220 liters
Dimensions approx. 2095 x 1600 x 1310 mm lxwxh,
Weight 1370 kg,
Automatic on-off switching via level indicator
CE compliant.
.
Requirements for the raw material:
- Chip length maximum 20 mm
- Installation temperature: temperature-controlled room at at least + 5 ° C
- The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear