Labeler + scanner

LOGOPAK LOGOMATIC 415 T + Scanner

You will find this and other machines that were part of our shipping line in our listings. If you are looking for a complete solution in this area or require several components, please feel free to contact us and we will get back to you promptly.

Brief overview of the shipping line and where the listed item was used:
The shipping line was designed for pallet shipping, meaning cartons were erected (SOCO ATS 2300 + 2200) and sealed at the bottom for packing along the main shipping line. The finished packages were then top-sealed using a carton sealer (SOCO T-4200) and passed on to a labeler (LOGOPAK LOGOMATIC 415-T). After the Logomatic scanner verified the packages as error-free, they were handed over to the palletizing robot (SOKO PRS-LRS-1218-H3) to create a pallet packed according to our specifications/dimensions. Our video demonstrates the entire shipping line in operation.

The item offered here is the LOGOMATIC 415-T labeler from LOGOPAK (circled in blue in the layout diagram).

Summary of all relevant technical data for the LOGOMATIC 415 T labeling system:
• Machine type: LOGOMATIC 415 T.
• Print resolution: 300 dpi (12 dot).
• Cycle performance: Maximum 20 products per minute.
• Operation: HMI (10-inch color LCD display) in German.
• Signal light: 3-color status light (red, blue, green) included.
• Frame: Standard frame with stainless steel spindle feet (±50 mm adjustable).
• Certification: CE certified (EU).
• Mains voltage: 230V AC / 50 Hz (L,N,PE). Supply voltage should not fluctuate more than ±5% and be free from interference.
• Power consumption: Maximum approx. 1400 VA.
• Electrical connections at installation site: 1x Schuko socket for the labeler and 1x Schuko socket for maintenance purposes.
• Compressed air: 6 bar, dry and oil-free. Air supply must be permanently installed up to approx. 1 meter before the device.
• Compressed air consumption: Approx. 250 l/min.
• Compressed air connection: ½ inch fixed line with FESTO quick coupling KD4-½-A and coupling plug KS4-CK-6.
• Temperature: Ambient temperature for the labeler should be between +5°C and +37°C. For processing PE labels, a temperature of 25°C is recommended.
• Applicator stroke length (net): 350 mm, defines the working area for different carton heights.
• Labeling height: 800 mm (standard setting).
• Orientation: Horizontally standing for top labeling.
• Label unwind/carrier take-up: For rolls up to 600 m running length.
• Label core adapter: 152 mm (6 inches).
• Current format (Amazon): 60 mm width x 40 mm height.
Dwedpfx Ajxdcv Hjftsc
• Future shipping label: Approx. 100 mm width x 200 mm height.
The above specifications can be adjusted depending on required label sizes.
• Label gap: 8 mm.
• Printing method: Thermal transfer.
• Label material: Paper labels (Economy TT paper).
• Ribbon (TTR): Wax quality.
• Interface: Ethernet (10/100 Mbit). A serial RS-232C port is also available.
• Data protocol: ZPL (Zebra).
• Data source: Host system.
• Data transmission: Print data is sent from a PC to the labeler via Ethernet.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.