Surface grinder

LODI T 60.35 CN

TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN
Rawable length mm: 600
Rawable width with grinding wheel width mm: 390
Rawable height with new grinding wheel (on magnetic chuck) mm: 400
Magnetic chuck surface mm: 600x300
Longitudinal travel mm: 750
Transverse travel of the carriage under the table mm: 350
Adjustable table speed m/min: 1-30
Gripping wheel dimensions mm: 400x40x127
Gripping wheel rotation speed, fixed rpm: 1,450
Automatic feed on the vertical axis, min. mm: 0.001
Spindle motor power: 7.5 kW
Hydraulic pump motor power: 2.2 kW
Net machine weight: 3,000 kg

- Vertical movement of the grinding wheel headstock
The vertical movement is performed on linear needle slides and is
controlled by a precision ball screw and a YASKAWA brushless motor.
Vertical axis resolution: 0.001 mm.
Optical scale with 0.001 mm resolution.
Dimension readout on the display. Display resolution: 0.001 mm.
Electronic handwheel for manual movement.

- Transverse movement
The transverse movement is performed on hydrostatic slides and is
controlled by a precision ball screw and a YASKAWA brushless motor.
Dimension readout on the display. Display resolution: 0.001 mm.
Optical scale with 0.001 mm resolution.

Electronic handwheel for manual movement.

- Longitudinal table movement
Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement.
Rotation speed is continuously adjustable from 1 to 30 m/min.

- Lubrication
Located outside the machine, this system controls the table movement and the lubrication of all moving parts.

ACCESSORIES
- LODI CNC type T 2020W with 12.1" graphic display (see photo)
- Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing
- Visualization to the thousandth of a millimeter of vertical and transverse axis movements
- Electronic handwheel for manual axis movement
- Coolant system with paper filter and high-pressure pump
- Mist extractor (capacity 2,400 m³/h)
- Electro-permanent magnetic plate, dimensions 600 x 300 mm
Guodpfjx N I Arex Af Ded
- Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation.

- YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest.

- Grinding wheel flange with balancing shaft
- Complete work area enclosure
- Work light