Belt sanding machineLöser
FS384/150-2
Belt sanding machine
Löser
FS384/150-2
وضعیت
کارکرده
موقعیت
Dietzenbach 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- Siemensstrasse 13 A, 63128 Dietzenbach, Deutschland

تماس بگیرید
جزئیات فنی
- قدرت:
- ۵٫۵ کیلووات (۷٫۴۸ اسب بخار)
جزئیات پیشنهاد
- شناسه آگهی:
- A17680888
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۲.۰۸.۱۴۰۳
توضیحات
The wet grinding machine with integrated stainless steel drip tray is used for professional processing of square tubes and flat profiles up to 150 mm wide and is suitable for grinding steel, stainless steel and non-ferrous metals.
The machine stand forms a machine unit together with the tool units and the control cabinet.
Iedju Nwt Eepfx Agbeap
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine stand forms a machine unit together with the tool units and the control cabinet.
Iedju Nwt Eepfx Agbeap
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2008
۷۶ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 6074 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Peterslahr
۴٬۲۶۰ km
Sonstige/OtherTankwagen
آگهی کوچک
Deskle
۳٬۷۲۴ km
TOSCATS-500
آگهی کوچک
Eislingen/Fils
۴٬۰۶۴ km
اينترلوكين مطبوعات - ستون
SCHULERPD 63-250
SCHULERPD 63-250
آگهی کوچک
Kanzach
۴٬۰۶۴ km
KalmarDFQ50 14/40 D
آگهی کوچک
San Giovanni Al Natisone
۳٬۷۳۸ km
LöserAA220
آگهی کوچک
Wildflecken
۴٬۰۸۵ km
KEHRENRS 7C
آگهی کوچک
مجارستان
۴٬۲۱۹ km
DMG MORIHSC 105
آگهی کوچک
Dietzenbach
۴٬۱۵۶ km
LöserRP-S 371
آگهی کوچک
Fuldatal
۴٬۱۳۶ km
WIEGANDS- 150
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است
















































































