TWIN BELT GRINDING MACHINE TYPE ZBSKuhlmeyer
ZBS 3Ex
TWIN BELT GRINDING MACHINE TYPE ZBS
Kuhlmeyer
ZBS 3Ex
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۳۹٬۰۰۰
سال ساخت
۲۰۲۲
وضعیت
ماشین نمایشگاهی
موقعیت
Piaseczno 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- TWIN BELT GRINDING MACHINE TYPE ZBS
- تولید کننده:
- Kuhlmeyer
- مدل:
- ZBS 3Ex
- شماره دستگاه:
- 23 03 28 / 1
- سال ساخت:
- ۲۰۲۲
- وضعیت:
- تقریباً نو (دستگاه نمایشی)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۱۳۹٬۰۰۰
- موقعیت:
- Mazurska, 18, 05-500 Piaseczno, Polska

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A16565521
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۷.۰۵.۱۴۰۴
توضیحات
TWIN BELT GRINDING MACHINE TYPE ZBS
for manual grinding, satin finishing and polishing
Dsdpfx Ajt Hvkvoa Tsup
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
for manual grinding, satin finishing and polishing
Dsdpfx Ajt Hvkvoa Tsup
- equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit
- free space within the working area by guiding the belts over an upper installed deflection unit
- open and close of upper grinding belt hoods by pneumatic cylinder
- accident protection by movable grinding belt cover
- selectable for front and rear belt
- preselection by 2 potentiometers in the control panel and frequency inverter in high-line version
- with limit switch/operation by movable grinding belt cover
- tension of each grinding belt by pneumatic belt tension device
- the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw
- frequency converter with brake chopper unit for braking in max. 10 s
- grinding belt speed v = 4 - 25 m/s
- emergency-off release line in the working area
- with a sliding table of aluminum-pipe installed between the machine stands
- table movement back and forward by means of 4 soft prism rolls
- max. workpiece weight 100 kg
- motorized table height adjustment by spindles and roller guiding's until max. 780 mm
- spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min
- machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground)
- with a temporary traverse, to remove after adjusting and bolting to the ground
- pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls
- dust extraction tube on the left hand machine stand with D = 200 mm
- necessary extraction power = approx. 3400 m3/h
- working area to be illuminated by means of 2 LED lights, adjustable in 3 steps
ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm
Filter included.
Additional info in pdf attached.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2019
۳ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+48 22 42... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Enschede
۴٬۳۳۹ km
OSTASSM 700 x 76
آگهی کوچک
Mudersbach
۴٬۲۳۱ km
FastechFRM 1050 x 90
آگهی کوچک
Allendorf (Eder)
۴٬۱۸۷ km
KBM Maschinenbau GmbHMS93-150
آگهی کوچک
Hódmezővásárhely
۳٬۲۲۹ km
Made in TaiwanAM1545 AH
آگهی کوچک
Kassel
۴٬۱۳۸ km
FendtFormer 14055 PRO Gen 2
آگهی کوچک
Allendorf (Eder)
۴٬۱۸۷ km
KBM Maschinenbau GmbHM2S92-150
آگهی کوچک
Bad Oeynhausen
۴٬۲۰۷ km
KuhlmeyerPSK
آگهی کوچک
Thurmaston
۴٬۸۷۷ km
HaasVF-5/40XT
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است




































































