3-Axis Hybrid Laser Marker

KEYENCE MD-X1000C

KEYENCE MD-X1000C 3-Axis Hybrid Laser Marker Industrial Engraver Etcher ( standard area/contactor)
Model:MD-X1000C*1
Type: Marking unit (controller + head) 13W Standard area
Marking method: XYZ 3-Axis simultaneous scanning method
Marking laser:
Type: YVO4 laser, Class 4 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2
Wavelength: 1,064 nm
Bsdpfxjy Uxxbs Adledc
Output: 13 W
Q-switch frequency: CW (continuous wave), 1 to 400 kHz
Guide laser/Working distance pointer: Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product (IEC60825-1, JIS C6802, FDA [CDRH] part 1040.10)*2
Marking area: 125 x 125 x 42 mm
Standard working distance: (±variable width): 189 mm (±21 mm)
Marking resolution: 2 µm
Scan speed: Max. 12,000 mm/s
Character type:
Font: KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font*3
Barcode:CODE39, ITF, 2of5, NW7 (CODABAR), JAN, CODE128, EAN, UPC-A, UPC-E
2D code:QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
GS1 DataBar: GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/GS1 DataBar Limited/
GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC‐A
Logo image: Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions
Workpiece style: Stationary marking, Moving marking (constant, encoder)
Character size (marking height/width): 0.1 to 125 mm
No. of registered programs: 2,000 max.
No. of program blocks: 256
I/O (Input/output): Terminal block I/O, MIL connector I/O, contactor control I/O*4
Interface:RS-232C, USB 2.0, Ethernet (100BASE-TX/10BASE-T)*5
Head installation direction: All directions
Head cable length: 4.3 ±0.1 m
Cooling method: Forced air cooling
Rated voltage and power consumption:100 to 120/200 to 240 VAC ±10 %, 50/60 Hz, 650 VA max.
Environmental resistance
Enclosure rating: IP64 (marking head)
Pollution degree: 2
Overvoltage category: II
Ambient temperature for storage: -10 to +60 °C (No freezing)
Ambient temperature: 0 to +40 °C
Ambient humidity for storage: 30 to 85 % RH (No condensation)
Weight: Controller: 23.0 kg, Head: 13.6 kg, Console: 2.0 kg.
*1 Type equipped with a contactor control terminal block.
*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice.
*3 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialog boxes of the fonts shown on the [Fonts] screen in [Control Panel].
*4 Supported models: MD-X1000C, MD-X1020C, MD-X1500C, MD-X1520C
*5 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder 3 (ActiveX). The Ethernet port supports communication with Marking Builder 3 (ActiveX), TCP/IP communication, EtherNet/IP™, and PROFINET.