Blechbearbeitungszentrum

Kaltenbach KF1606

The Kaltenbach sheet metal processing center is ideally suited for steel construction, the steel trade and plant engineering.
Standard sheet metal plates up to 1600 mm wide, 6 - 60 mm thick and 6000 mm long as well as sheet metal strips and flat steels from a width of 100 mm can be moved safely through the system with the gripper measuring device. The length measuring system in the X-axis consists of a double gripper measuring carriage with a hydraulic collet.
An oxy-fuel cutting unit or a plasma cutting unit from Hypertherm are available for flame cutting. Sheets with a material thickness of up to 30 mm are usually cut with the plasma unit and thicker material thicknesses with the oxy-fuel unit. Both flame cutting units are equipped with remote ignition, flame monitoring and automatic height distance control.
A powerful cartridge filter system filters the cutting gases produced during plasma cutting.

The drilling spindle has a drive power of 26 kW and a spindle speed of 150 - 2000 rpm. A 6-position tool changer ensures fast and automatic tool changes.
The drilling unit is suitable for the use of carbide and solid carbide tools, which you can obtain from Nenok including the suitable nencool micro cooling lubricant. Center punching, countersinking and thread cutting is also possible with the suitable tools.

The machine is equipped with an embossing unit for embossing letters and numbers.

Blsdpfxoxzfnaj Af Djd
The sheet metal processing center is supplied with an infeed roller conveyor for 6,000 mm long metal sheets as well as a storage table and integrated rollers on the outfeed side. On the infeed side, the roller conveyor is equipped with 3 cross tractors.

Number of drilling spindles: 1 pc.
Drilling diameter: 8 - 50 mm
Cutting system: 1
Machine weight approx.: 12 t
Panel width: 1,600 mm
Panel thickness: 6 - 60 mm