Tube bending, mandrel bending machineJutec Biegesysteme GmbH & Co. KG
Biegesystem 4800
Tube bending, mandrel bending machine
Jutec Biegesysteme GmbH & Co. KG
Biegesystem 4800
سال ساخت
۲۰۲۵
وضعیت
جدید
موقعیت
Limburg an der Lahn 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Tube bending, mandrel bending machine
- تولید کننده:
- Jutec Biegesysteme GmbH & Co. KG
- مدل:
- Biegesystem 4800
- شماره دستگاه:
- 1018
- سال ساخت:
- ۲۰۲۵
- وضعیت:
- نو
قیمت و مکان
- موقعیت:
- Robert-Bosch-Straße 8, 65549 Limburg an der Lahn, DE
- اجاره:
- امکانپذیر است
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A11683487
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۴.۰۲.۱۴۰۴
توضیحات
THE MANDREL BENDER WITH MANUEL CLAMPING:
This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback.
The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached.
POSSIBLE APPLICATIONS:
- Plant engineering, e.g. chemical industry
- hydraulic piping
- prototyping
- Pipeline construction
TECHNICAL DATA:
- Bending capacity Ø 6 to 50 mm
- bending radius min/max: 10 mm/140 mm
- Bending radii 2 x D
Lsdjnfvy Uspfx Agnjah
- multifunction machine control bending angle adjustment (0,1°)
- mandrel beam lengths 1500/3000/4500/ 6000 mm (special version
also longer)
- Maximum 180º bending result
- Weight 300-500 kg (depending on version)
Optional accessories:
- Automatic mandrel lubrication (minimum quantity)
- Digital displacement measurement for length and twist (resolution 0.1
OUR SERVICE:
- Welcome to the test production in our house in the demo room
- Consultation and information meeting at your site
- Consultation and handling as leasing/financing-purchase via
the company JUTEC
- Service contracts, maintenance at your site
This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback.
The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached.
POSSIBLE APPLICATIONS:
- Plant engineering, e.g. chemical industry
- hydraulic piping
- prototyping
- Pipeline construction
TECHNICAL DATA:
- Bending capacity Ø 6 to 50 mm
- bending radius min/max: 10 mm/140 mm
- Bending radii 2 x D
Lsdjnfvy Uspfx Agnjah
- multifunction machine control bending angle adjustment (0,1°)
- mandrel beam lengths 1500/3000/4500/ 6000 mm (special version
also longer)
- Maximum 180º bending result
- Weight 300-500 kg (depending on version)
Optional accessories:
- Automatic mandrel lubrication (minimum quantity)
- Digital displacement measurement for length and twist (resolution 0.1
OUR SERVICE:
- Welcome to the test production in our house in the demo room
- Consultation and information meeting at your site
- Consultation and handling as leasing/financing-purchase via
the company JUTEC
- Service contracts, maintenance at your site
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2023
ارسال درخواست
تلفن & فکس
+49 6431 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است