Welding fume extraction IVAT

IVAT Air FTower 20.000

IVAT 20000 m3/h filter ventilation tower

Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking.

Suction from the top and draft-free exhaust from the bottom - exactly to the workplace.
The principle of layered filter ventilation, the device does not require the installation of pipelines.
Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation.
Filter cleaning by means of pressure difference - no loss of compressed air.
Gjdpfx Aovrgbtjcyjtt
The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation.

Brand: IVAT

Model: Air FTower-20.000

Year of production 2016

Working hours: 3890

Parameters:

15 kW fan

Air flow 20000 m3/h

Filter surface 222 m2

6 cartridge inserts

Built-in frequency converter.

Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter.

Dust drawer with a capacity of 200 l.

Very quiet operation 75 dB (A)

Purification degree - > 99.9 %

Stock no.: 0944

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.