Baling press, type VK 4812

HSM GmbH + Co. KG Ballenpresse, VK 4812

Technical information baler:
Manufacturer HSM GmbH + Co. KG
Typ VK 4812
Year of construction 2014
Hours of operation 5,612 hours, stand August 2025
Press power main press 48 tons
Specific press capacity 58,2 N/cm²
Feed channel 1,250 x 1,020 mm
Theoretic cycle time 11.2 sec.
Theoretic throughput rate 332 m³/hour
Bale size 1,100 x 750 x 600 up to 1,200 mm
Driving motor 30 kW
Connected load 32 kW
Rated current 59 A
Tying system 4-fold horizontal, fully automatic
Throughput rate at a
bulk weight of 20 kg/cbm up to 6 tons/hour
bulk weight of 50 kg/cbm up to 13 tons/hour
Bale weight up to 550 kg, depends on material
SPS controller Siemens SIMATIC S7-200
Operating panel Siemens HMI Touch Panel
Filling quantity hydraulic oil tank 300 L
Oil type HVI 46
Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h)
Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h)
Machine weight press approx. 12 t

Scope of delivery:
Baler HSM VK 4812, without hydraulic oil, without conveyor system.
Two wire reel boxes for 8 pieces 40 kg wire reels, without wire
Tjdpfx Agovtpq Hjkjf
Bale chute
Machine documentation in German

Comments:
The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport.

The press was partially overhauled and tested in our workshop, see photos.
The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.