Conveyor fan

Holzmann Maschinen Fan 2200

Keep your workshop tidy and free of wood dust and shavings with this wall-mountable extraction fan.

The Holzmann FAN2200 moves 4,000 m³/h of air through a 2.2 kW 400V three-phase motor and can be wall-mounted to save floor space. It is fully functional and ready for use. Minor cosmetic dents on the top housing and inlet are clearly visible in the photos and do not affect operation. Optionally available with a matching hose, reducers, blast gate, connectors, and clamps for a ready-to-connect 160mm ducting system.

Only one unit is available – once it’s sold, it’s gone. The Ø160mm pipe/hose accessories may be sold separately.
Best for: workshop extraction of wood dust and shavings, moving dust-laden air over short duct runs in areas with limited floor space.

Not suitable for: explosive dust atmospheres requiring ATEX certification (unless independently verified), wet material, or long duct runs without a properly sized system.

What the specifications mean in practice:
• 4,000 m³/h extraction capacity – moves a high volume of dust-laden air, sufficient for several machines.
• 1,900 Pa negative pressure – pulls through hoses and bends, not just short, straight pipes.
• 200mm inlet / 180mm outlet – connects to standard workshop ducting, reducible to 160mm with the optional kit.
• Wall-mountable, 36 kg – frees up floor space in a small workshop.
• 2.2 kW 400V motor, S1 rating – designed for continuous operation, not short bursts.
• 85 dB(A) sound power – plan for hearing protection or mount it outside the working area.

Optional complete connection package (+CHF 250): 10m PU hose NW160, 2 reducers Ø200/160, 1 blast gate Ø160, 2 hose connectors Ø160, 3 pipe clamps Ø160, 2 hose clamps Ø150-170, all Holzkraft, and all matched to this fan.

Technical data:
– Model: Holzmann FAN2200_400V
– Motor power (S1): 2.2 kW
– Voltage: 400V/3-phase/50Hz
– Extraction capacity: 4,000 m³/h
Tsdpszx D Dnsfx Aggjb
– Impeller diameter: 330mm
– Negative pressure: 1,900 Pa
– Sound power: 85 dB(A)
– Port: 200mm (in)/180mm (out)
– Dimensions: 575x585x705mm
– Weight: 36kg net/38kg gross

Condition: Used, fully functional. Minor cosmetic dents on the top housing and inlet (present upon arrival) – see photos.
Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement).
Buy with confidence: fully functional and ready for use; dents were present when we purchased it and are shown in the photos, so there will be no surprises upon pickup. A functional test is possible before pickup; photos of the nameplate and a video of it running are available. In-person inspection in Kerns OW by appointment.

Why buy now: single used unit available, not stock. The Ø160mm accessory package is a one-time set and may be sold separately to another buyer.

First-buyer bonus: free functional test run before pickup, plus the Ø160mm blast gate and hose clamps from the accessory set, at no extra cost. Valid until September 9, 2026, or until sold.

Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.