3690 liter heatable/coolable reactor made of V4A with beam agitator

HANAG 8758

GENERAL INFORMATION
Design: suspension-mounted
Remarks: Support ring made of steel; manway cover incomplete; on one vessel, the heating connections are mostly cut off and supplied loose; one vessel is approximately 100 mm shorter in overall height due to different motor/gearbox assemblies
Speed: 42 - 211 rpm
Internal diameter: 1,600 mm
Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified)
Total height: 3,750 mm
Heating/Cooling: available
Power: 3 kW
Max. allowable operating temperature: 200 °C
Max. allowable operating overpressure: 16.0 bar
Max. overpressure: 3.2 bar
Agitator: blade agitator
Support design: ring mounting
Location: Bremen
Technical documentation: drawing, various documents, inspection certificate
Cylinder temperature control: half-pipe coil
Nameplate:
Vacuum: 1.0 bar
Volume: 3,690 litres
Double jacket volume: 145.0 litres
Cylinder wall thickness: 6 mm
Product-contact material: V4A 1.4435 (AISI316)
Condition: used
Cylindrical height: 1,380 mm
Last application: pharmaceutical chemistry

VESSEL
Max. allowable operating temperature: 200 °C

HEATING/COOLING JACKET
Max. allowable operating underpressure: 1.0 bar
Bottom temperature control: half-pipe coil

EQUIPMENT
Manway / dome: in top head (DN 500)
Outlet: 130 mm

MATERIAL SPECIFICATION
Temperature control system material: V2A 1.4301 (AISI304)

AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400 Volt

TECHNICAL DATA / DIMENSIONS
Bottom wall thickness: 6.1 mm
Dcsdpfsxqax Ejx Ag Ier
Agitator positioning: centred on the top head
Agitator features: Minor variations in agitator design (Interprop blade agitator installed on the shaft for media up to approx. 3,000 mPas; on one vessel an additional stabilising propeller is mounted on the shaft); speed range adjustable via external speed controller (no longer available) (for one of the agitators this speed range is 25 - 126 rpm); partial technical documentation on agitators available
Top head wall thickness: 7.9 mm

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.