Vertical machining center

Haas TRT210

Nearly brand-new Haas TRT210 two-axis rotary table with only approximately 120 operating hours.

The table was exclusively used on a Haas VF-4 (see separate listing) and is in visually and technically flawless condition.
Pedpfsy Tp Hgjx Ad Regl

The TRT210 is Haas's compact 5-axis solution for medium-sized VMCs and takes up minimal space at one end of the machine table – the rest of the clamping area remains free for vices or other fixtures.

Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software.

In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for the side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the entire A-axis swivel range.

Available from approximately week 32. Inspection possible by appointment. Shipping can be arranged.

Technical data:
- Table diameter: 230 mm (9.10")
- Max. circle diameter: 368 mm (14.5")
- Max. workpiece weight on table: up to approx. 90 kg
- Hole pattern: 2 x 6-hole pattern

A-axis (swivel):
- Swivel range: ±120°
- Max. speed: 80°/s
- Max. torque: approx. 407 Nm (300 ft-lb)
- Braking torque at 6.9 bar: approx. 540 Nm
- Accuracy: ±25 arc-sec
- Repeatability: 10 arc-sec
- Resolution: 0.001°

B-axis (rotation):
- Rotation range: 360°/continuous
- Max. speed: 100°/s
- Max. torque: approx. 285 Nm (210 ft-lb)
- Braking torque at 6.9 bar: approx. 270 Nm
- Maximum runout: 0.013 mm (0.0005")
- Accuracy: ±15 arc-sec
- Repeatability: 10 arc-sec
- Resolution: 0.001°

General:
- Connection voltage: 115 VAC, approx. 15 A
- Max. compressed air: approx. 10 bar (150 psi)
- Weight: approx. 220 kg

Scope of supply:
- Haas TRT210 rotary table, complete
- Original Haas servo connection cable for A- and B-axes
- Toe clamp kit (for mounting on the machine table)
- Renishaw riser block for side receiver mounting
- Original documentation

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.