5-axis universal machining center

GROB G350

Highlights:

- Powerful HSK-A 63 Motorizied spindle with 21.000 rpm

- pallet change system for 2 pallets

- High-pressure cutting fluid system (40 bar)
_____

Basic machine G350 AB generation 2

Travel path of the X-axis 600.0 mm

Travel path of the Y'-axis 855.0 mm

Travel path of the Z-axis 750.0 mm

Power supply 400 V, 50 Hz, TN-S

Work area door, automatic, for manual and automatic loading/unloading

Decentralized work area mist collector: 800 m³

Machine control SIEMENS SINUMERIK ONE

Swivel axis calibration GSC Advanced

Energy efficiency package EEP1

Tilting table unit (A'-axis)

Rotary table with pallet clamping system GROB (B'-axis, PW)

Motorized spindle HSK-A 63, 21,000 rpm, 35/47 Nm, 29/39 kW, oil-air lubrication

GROB spindle diagnostics GSD

Double disk-type tool magazine HSK-A 63 with 105 (45+60) tool pockets

Tool cleaning device

Tool coding, system BIS-M (BALLUFF)

Electromechanical tool breakage detection device

Laser measurement system LaserControl NT LC50-DIGILOG for milling tools

Pallet change system for 2 400 x 400 mm pallets

Setup station door, automatic, for manual and automatic loading and unloading

2x Pallet 400 x 400 mm, T-slots, with pallet changer hook

Pallet equipped with 6 fluid connections

High-pressure cutting fluid system (5-40 bar, IKZ)

Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW)

Bedextknpopfx Aahodi
Compressed air feed through spindle center

Cutting fluid recirculation on weekends

Oil skimmer for cutting fluid care

Air gun at the work area

Flush gun at the work area

Flushing unit (Z-axis)

Part clamping system in the work area
KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1)
KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1)
KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1)
KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1)

Cooling unit for hydraulic proportional valves
Part clamping system in the setup station of the pallet changer

KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1)
KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1)
KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1)
KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1)
KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1)
KP6: Compressed air, seating check system with SOPA air gap sensor make FESTO (P6.1)

Work area camera for machine control panel GROB⁴Pilot (ROTOCLEAR)

Radio touch probe RMP400 (RENISHAW)

12-month warranty