CNC turning and milling center

Gildemeister Sprint 42 - linear inkl. Stangenlader

The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center featuring 6 linear axes and 2 C-axes. Direct drives enable high acceleration rates and precise machining operations. Both the main and sub spindles have been fitted with new bearings, and the machine has undergone a comprehensive overhaul.

The following components have recently been renewed:
- Drive motor of the driven tool 2 replaced
- Sub spindle newly fitted with bearings
- New door interlock switch installed

Spindles: Main and sub spindle each up to 6,500 rpm, main spindle bar capacity 42 mm, sub spindle 38 mm

Tool capacity: 26 stations, up to 11 powered tools; turret with Y-axis for milling and threading operations

Axes / travels:
Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm
Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm
Rapid traverse: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min
Control: FANUC 160i-TB with 15" DMG SlimLine panel

Ksdpfx Aeyvy I Tegbjdi
Including IEMCA Boss 545-E bar feeder

The IEMCA Boss 545-E bar feeder (type 32 LL, year 2007) is included in the scope of delivery and enables continuous material feed up to Ø 42 mm.
It operates on 400 V / 50 Hz and requires 6 bar air pressure; its own weight is approx. 860 kg.

Inspection & collection: On-site inspection is possible

If you are interested or have technical questions, please do not hesitate to contact us.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.