Vertical turning latheGildemeister
CTV 200
Vertical turning lathe
Gildemeister
CTV 200
قیمت آغازین
€۷٬۵۰۰
سال ساخت
۲۰۰۲
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Județul Brașov 

مشاهده مزایده
اطلاعات دستگاه
- نام دستگاه:
- Vertical turning lathe
- تولید کننده:
- Gildemeister
- مدل:
- CTV 200
- شماره دستگاه:
- 06810000041
- سال ساخت:
- ۲۰۰۲
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۷۷٬۱۱۹ h
جزئیات فنی
- حداکثر سرعت چرخش:
- ۶٬۰۰۰ دور/دقیقه
- سوراخ اسپیندل:
- ۵۶ میلیمتر
- قطر محور چرخان:
- ۹۰ میلیمتر
- وزن خالی:
- ۶٬۰۰۰ کیلوگرم
ارائه
- موقعیت:
- Județul Brașov, رومانیہ
– فاصله: حدود ۲٬۸۱۸ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- FCA
هزینههای پیادهسازی و بارگیری:
€۱٬۴۰۰٫۰۰ (الزامی)
€۱٬۴۰۰٫۰۰ (الزامی)
تحویل در محل:
رایگان
رایگان
هزینه ارسال:
توضیحات
TECHNICAL DETAILS
X-axis travel: 800 mm
Z-axis travel: 300 mm
Rapid traverse rate X: 100 m/min
Rapid traverse rate Z: 45 m/min
Chuck diameter: 200 mm
Spindle head, flat flange: F140 h5
Spindle diameter in the front bearing: 90 mm
Spindle bore: 56 mm
C-axis
Speed range: 0–100 RPM
Torque, holding torque brake: 240 Nm
Accuracy in point positioning: < 0.02 degrees
Number of tool stations: 12
Cylindrical shank diameter: 40 mm
Drive power, 40% duty cycle: 10.8 kW
Torque: 28 Nm
Speed: max. 6,000 RPM
MACHINE DETAILS
Power of the three-phase main drive: 25 kW
Torque, 100% duty cycle: 160 Nm
Speed range: 20–7,000 RPM
Electrical data
Power: 25/35 kW
Voltage: 400 V / 50 Hz
Control voltage: 24 V DC
Hydraulics
Total content: approx. 25 l
Pressure: 80 bar
Pressure for clamping device: max. 700 bar
Coolant system
Content: approx. 190 l
Pump power: 1.7 kW
Flow rate at 6 bar: 20 l/min
Weight: approx. 6,000 kg
Operating hours: 77,119 h
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
X-axis travel: 800 mm
Z-axis travel: 300 mm
Rapid traverse rate X: 100 m/min
Rapid traverse rate Z: 45 m/min
Chuck diameter: 200 mm
Spindle head, flat flange: F140 h5
Spindle diameter in the front bearing: 90 mm
Spindle bore: 56 mm
C-axis
Speed range: 0–100 RPM
Torque, holding torque brake: 240 Nm
Accuracy in point positioning: < 0.02 degrees
Number of tool stations: 12
Cylindrical shank diameter: 40 mm
Drive power, 40% duty cycle: 10.8 kW
Torque: 28 Nm
Speed: max. 6,000 RPM
MACHINE DETAILS
Power of the three-phase main drive: 25 kW
Torque, 100% duty cycle: 160 Nm
Speed range: 20–7,000 RPM
Electrical data
Power: 25/35 kW
Voltage: 400 V / 50 Hz
Control voltage: 24 V DC
Hydraulics
Total content: approx. 25 l
Pressure: 80 bar
Pressure for clamping device: max. 700 bar
Coolant system
Content: approx. 190 l
Pump power: 1.7 kW
Flow rate at 6 bar: 20 l/min
Weight: approx. 6,000 kg
Operating hours: 77,119 h
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A21981283
- شماره مرجع:
- AUC-2605168
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۱.۰۳.۱۴۰۵
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
امکان بازدید
دستگاه تحت برق است
Machineseeker به طور کلی بازدید از ماشینآلات دست دوم را توصیه میکند.
کلیه اطلاعات بر اساس بهترین دانش و وجدان ارائه شده است – لطفاً حضوری تأیید فرمایید.
مقالات از همان مکان:
حراج
به پایان میرسد در
d
h
min
s
حراج پایان یافت
Județul Brașov
۲٬۸۱۸ km
INDEXV 160C
حراج
به پایان میرسد در
d
h
min
s
حراج پایان یافت
Județul Brașov
۲٬۸۱۸ km
EMAGVL 3 HV
حراج
به پایان میرسد در
d
h
min
s
حراج پایان یافت
Județul Brașov
۲٬۸۱۸ km
INDEXV 160C
حراج
به پایان میرسد در
d
h
min
s
حراج پایان یافت
Județul Brașov
۲٬۸۱۸ km
GildemeisterCTV 200
حراج
به پایان میرسد در
d
h
min
s
حراج پایان یافت
Județul Brașov
۲٬۸۱۸ km
GildemeisterCTV 200
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است


























































