Wire EDM machine

GF Machining Solutions CUT 2000

TECHNICAL DETAILS
Max. workpiece dimensions width x depth x height: 750 x 550 x 250 mm
Max. workpiece weight: 200 kg (submerged), 450 kg (not submerged)

travel paths
Travels X/Y/Z axes: 350 / 250 / 256 mm
Travel range U/V axes: ±70 mm
Max. taper at height: 30° at 100 mm

positioning speeds
Manual positioning speed X/Y/Z/U/V axes: 2 m/min
Programmable positioning speed X/Y/Z/U/V axes: 3 m/min

remote control
Functions: Wire drive, work container, measuring cycles
Display resolution: 0.0001 mm
Jogger: electronic handwheel for X/Y/U/V/Z axes

control console
Display: TFT 15" XGA (1024 x 768)
Input elements: alphanumeric pushbuttons, keyboard/mouse

wire threading system
Threadable height: up to 250 mm
Threading nozzle diameter: 2 mm

Combined wire guide
Wire diameter: Standard 0.07 - 0.3 mm (Option: 0.05 mm)
V-Guide: cylindrical to 2°
Toroid Guide: 2° - 30°

wire drive
Wire spool: up to 25 kg
Wire tension: 0 - 25 N
Wire speed: 0 - 300 m/s
Wire guide: semi-automatic
Wire disposal: Schopper

work container
Access: automatic lowering tank
Clamping system: clamping support or universal clamping frame
Operating mode: water bath and/or coaxial flushing
Height adjustment: 0 - 250 mm automatic

flushing
Flushing pressure: 0.2 - 18 bar programmable
Flushing combination: coaxial/rinsing/suction

dielectric unit
Loading volume: 700 l
Pre-cleaning: 10 µS/cm
Water quality: 4 canisters with 8 filter cartridges
Deionization resin: 10 l
Water conductivity: 2 µS/cm automatic
Cooling system: water/heat exchanger
Temperature control: ±1 °C automatic

IPG generator
Generator: integrated
Average working current: 38 A
Feed control: servo-controlled/fixed feed
Cooling system: air/heat exchanger
Max. cutting speed, cylindrical: 300 mm²/min
Best roughness Ra: 0.1 µm
Average contour deviation Tkm: ± 1 µm (Tf 6 µm)

Vision 5 control
Control/operator interface: Vision 5
Operating system: Windows XP
Operating mode: Multiprocessor
Units of measurement: mm/inch
Instruction set: absolute/incremental
Smallest programmable step: 0.0001 mm
Max. command length: 15 digits with floating point
Max. path correction: 6 mm

MACHINE DETAILS
Dimensions width x depth x height: 2,095 x 1,950 x 2,247 mm
Distance from floor to clamping surface: 1,100 mm
Net weight: 2,800 kg
Operating hours: